Specifications

V.3229 / V.3229L <C#>-47
5
Asynchronous Operating Commands
AutoConfigure
Commands
The AutoConfigure feature is controlled by either
the &F, &Y, or Z command. AutoConfigure loads
an entire preselected group of options with a single
command.
Powerup Option
Set
&Y
The &Y command determines which user option set
is loaded during powerup and reset.
Load Factory
Options
&F
The AT&Fn command loads one the existing fac-
tory option sets. Refer to Appendix D for a complete
list of the options in each set.
Table 40:
Command Operation
&Y Powerup with user option set 1
&Y1 Powerup with user option set 2
&Y? Displays currently selected powerup
option set
Table 41:
Command Operation
&F, &F1 Load factory option 1 (async dial-up
with V.42 bis)*
Protoco
lC
omman
d
s,
C
ont.