Reference Guide series DIGITAL WIRELESS TELEPHONE
Welcome Welcome to the world of Motorola digital wireless communications! Motorola is a global leader in communications technology. We are pleased that you have chosen the Motorola V Series 120c wireless phone to keep you connected with ease. This reference guide is a companion to the user guide that is packaged with the Motorola V Series 120c wireless phone. Important: This reference guide is not a replacement for the user guide that you originally received with your wireless phone.
Personal Communications Sector 600 North U.S. Highway 45 Libertyville, Illinois 60048 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States) 1-800-461-4575 (Canada) www.motorola.com (United States) www.motorola.ca (Canada) MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. TrueSync, Sidekick, Starfish and the Stylized Starfish Logo are registered trademarks of Starfish Software, Inc.
Contents About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Chapter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Sending and Receiving Calls . . . . . . . . . . . . . . . . . . . . . . 16 Turning Your Phone On . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Sending a Call . . . . .
Contents Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . Muting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing Your Phone Number . . . . . . . . . . . . . . . . . . . . . . Using the In-Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . Sending or Receiving a Data or Fax Call . . . . . . . . . . . . . . Sending Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Entering a PIN to Dial . . . . . . . . . . . . . . . .
Contents Quick Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Dialing a Quick Dial Number . . . . . . . . . . . . . . . . . . . . . . 60 Storing a Quick Dial Number . . . . . . . . . . . . . . . . . . . . . . 60 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Turning the Radio On and Off . . . . . . . . . . . . . . . . . . . . . . 62 Tuning a Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Voice Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Recording a Voice Note . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Viewing the Voice Notes List . . . . . . . . . . . . . . . . . . . . . . 95 Playing a Voice Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Locking and Unlocking a Voice Note . . . . . . . . . . . . . . . . 98 Deleting a Voice Note . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Voice Note Memory . . . . . . . .
Contents If You Forget a Code or Password . . . . . . . . . . . . . . . . . . 117 Locking and Unlocking Your Phone . . . . . . . . . . . . . . . . . 118 Locking and Unlocking Your Keypad . . . . . . . . . . . . . . . . 119 Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Locking and Unlocking Applications . . . . . . . . . . . . . . . . 121 Personalized Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Changing the Wake-up Greeting . . . . . . . . . . . .
Contents Adjusting Service Tones . . . . . . . . . . . . . . . . . . . . . . . . . Setting the Call Drop Alert . . . . . . . . . . . . . . . . . . . . . . . Hands-Free Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic Hands-Free . . . . . . . . . . . . . . . . . . . . . . . . . . Power-Off Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charger Time . . . . . . . . . . . . . . . . . . . . .
About This Guide This reference guide is a companion to the user guide that is packaged with the Motorola V wireless phone. Overview of Topics While the user guide briefly covers the most popular phone features, this reference guide describes all of the phone’s menu features in detail. Refer to the user guide for general information about using the phone.
About This Guide Navigating to a Menu Feature You can access many of your phone’s features through the menu system. This guide shows you how to navigate to a specific menu feature as follows: Find the Feature M > Recent Calls > Dialed Calls The > symbol means that you should scroll to and select the feature. This example shows that you must press M, scroll to and select Recent Calls, then scroll to and select Dialed Calls to view the dialed calls list.
Feature Overview This chapter provides an overview of the features described in each chapter, followed by a menu map with the layout of the features on your phone. The order of the chapters reflects the order of the features on the menu map. You or your service provider may have modified the menu structure or changed some feature names. Not all features may be available for all users.
Feature Overview Chapter Quick Dial Description How to call quick dial numbers programmed by your service provider Radio How to use the optional FM Stereo Radio Headset accessory with your phone Messages VoiceMail How to use voicemail Messages Text How to create and use text messages Shortcuts How to create and use keypad and voice shortcuts to features How to record personal voice note messages for playback at a later time How to start a micro-browser session and use micro-browser features Voice
Feature Overview Chapter Data and Fax Calls In-Call Setup Security Personalized Settings Initial Setup Network Services Hands-Free Description How to connect your phone to an external device, how to send and receive data and fax calls How to set the features that are active during a call How to lock and unlock your phone and keypad, lock phone applications, change codes and passwords, restrict incoming and outgoing calls How to customize phone settings, reorder menu items, and change soft key functions
Feature Overview some feature names. Not all features may be available for all users. Main Menu • Recent Calls • Received Calls • Dialed Calls • Notepad • Call Times • Phonebook • Quick Dial • Radio • Messages • Voicemail • Text Msgs • Browser Alerts • Quick Notes • Outbox • Drafts • Shortcuts • Voice Notes • Browser • Settings (see next page) 14 Note: This is the standard menu layout. You or your service provider may have modified the menu structure or changed some feature names.
Feature Overview Settings Menu • Ring/Vibrate • Alert • Alert Detail • Phone Status • My Tel.
Sending and Receiving Calls Turning Your Phone On 16 Do This 1 Press and hold P (the power key) Power key To turn on your phone 2 Enter your four-digit unlock code and press OK (+) unlock your phone, if necessary The unlock code is originally set to 1234. (For more information, see “Locking and Unlocking Your Phone” on page 118.
Sending and Receiving Calls Sending a Call To call a number, your phone must be turned on, be unlocked, and have a network connection with adequate signal strength. Do This 1 Extend the antenna 2 Press the keypad keys 3 Press N (send key) To optimize signal reception Tip: Your phone uses a two-stage antenna that must be fully extended for proper operation. You may have to pull on the antenna a second time to extend the antenna to its maximum length.
Sending and Receiving Calls Receiving a Call To receive a call, your phone must be turned on and have a network connection with adequate signal strength. If your phone is locked, you must unlock the phone to answer the call. When you receive a call, your phone rings and/or vibrates and displays an incoming call message.
Sending and Receiving Calls Using Automatic Redial If the network is busy, you hear a fast busy signal, and your phone displays the message Call Failed. When you activate automatic redial, your phone repeats the call attempt over the next four minutes. Press N or RETRY (+) To activate automatic redial When the call goes through, your phone rings or vibrates once, displays Redial Successful, and then connects the call automatically. You must turn on automatic redial in order to use the feature.
Sending and Receiving Calls Returning an Unanswered Call Your phone keeps a record of your unanswered calls. When you cannot answer a call, your phone displays: • the T (missed call) indicator • the message X Missed Calls Y Unknown, where X is the total number of missed calls and Y is the number of missed calls for which caller ID information is not available.
Sending and Receiving Calls Entering Numbers in the Notepad Your phone stores the most recent string of digits entered on the keypad in a temporary memory location called the notepad. These digits can be the last phone number that you called, or a phone number that you simply entered but did not call. These digits remain in the notepad even when you turn off the phone.
Sending and Receiving Calls number for the phonebook entry you want to call, you can use the speed dial feature. Press 1 keypad keys 2 # 3 N To enter the one-, two-, or three-digit speed dial number for the entry you want to dial submit the number call the entry To make an entry in the phonebook or view an existing entry’s speed dial number, see “Storing a Phonebook Entry” on page 50. Dialing with One-Touch Dial You can call phonebook entries 2 through 9 with the push of a single key.
Sending and Receiving Calls Do This 2 Complete the instructions for “Storing Your Voicemail Number” on page 65 To enable voicemail soft key and menu shortcuts To store entries in locations 2 through 9 in the phonebook, see “Storing a Phonebook Entry” on page 50. Dialing a Number In a Text Message If you receive a text message with an embedded phone number, you can dial the number directly. Note: You must set up your inbox before opening messages. See “Set Up the Text Message Inbox” on page 67.
Sending and Receiving Calls Inserting a Pause, Wait, or ‘n’ Character You can use your phone to make calling card or credit card calls, or to retrieve messages from an answering machine. These types of calls typically require that you dial and send additional digits when prompted. To simplify the process, you can insert the following special characters when dialing.
Sending and Receiving Calls • You can enter only one n character in the dialing sequence. • Because call connection times can vary, inserting a single p character in the dialing sequence may not yield the desired result. In this case, inserting a w character or multiple p characters may be a better alternative.
Sending and Receiving Calls Do This 2 release * when the character you want is visible in the display To insert the character at the current location in the dialing sequence Dialing a Number from a Recent Call You can view or call a number from a call you recently dialed or received. Note: If your phone displays a Missed Calls message and you just want to dial the call you missed, see “Returning an Unanswered Call” on page 20.
Sending and Receiving Calls Dialing with Voice Dial You can call or send email to a phonebook entry by speaking its voice name into the phone: Do This Press and release the voice key on the right side of your phone and say the entry’s name (in two seconds).
Sending and Receiving Calls Dialing a Number from Your Phonebook Your phonebook lets you store a list of names and numbers, so that you can locate them and dial them quickly. Find the Feature M > Phonebook Press 1 S To scroll to the entry you want to call 2 N An indicator next to the entry identifies the number type: work, home, main, mobile, fax, or pager.
Sending and Receiving Calls Attach a Number While Dialing To enter prefix digits for a number stored in your phonebook or the recent calls list: Press 1 keypad keys 2 M 3 S 4 SELECT (+) 5 S 6 SELECT (+) 7 S To enter the digits that will precede the number you select from the phonebook or recent calls list open the menu scroll to Attach Number select Attach Number scroll to the list with the number you want to attach select the list scroll to the number 8 SELECT (+) select the number 9 N Your pho
Sending and Receiving Calls Attach Two or More Numbers from the Phonebook or Recent Calls List To attach two or more numbers stored in your phonebook or the recent calls list: Find the Feature M > Phonebook or > Recent Calls > Received Calls or > Recent Calls > Dialed Calls Press 1 S To scroll to the first number 2 M open the menu scroll to Attach Number 3 S 4 SELECT (+) 5 S 6 SELECT (+) 7 S 8 SELECT (+) select Attach Number scroll to Phonebook, Received Calls, or Dialed Calls select the list
Sending and Receiving Calls Adding Digits You can add digits (for example, a PIN or credit card number) to the end of a number stored in your phonebook or the recent calls list, and then place a call to the number.
Using Features While On a Call You can use many of your phone’s features during a phone call. You can also set up features in advance to determine how your phone works during a call. Using Call Waiting If you subscribe to call waiting, an alert tone sounds while you are on a call to indicate that you have received a second call.
Using Features While On a Call Making a Three-Way Call During a call, you can call and connect a third party so that the three of you can talk together. You cannot do this if you already have a call on hold.
Using Features While On a Call Using the In-Call Timer Your phone can display a running timer for your current phone call and notify you when the call reaches a specified time limit. For information on how to set this feature, see “Setting the In-Call Timer” on page 114. Sending or Receiving a Data or Fax Call During a data call, your phone sends all new messages and calls to the machine connected to your phone.
Using Features While On a Call Press 4 SELECT (+) To select Send Tones to send the digits as DTMF tones To activate DTMF tones, see “Adjusting the DTMF Setting” on page 133. Entering a PIN to Dial On some networks, you have to enter a PIN (Personal Identification Number) to call certain numbers. Press 1 keypad keys 2 N 3 keypad keys To enter the number to call call the number enter your PIN 4 N Note: You do not need to do this if you have Auto-PIN switched on. See “Setting Auto PIN Dial” on page 128.
Entering Text Various text entry methods make it easy for you to enter names, numbers, email addresses, and text messages on your phone. You can enter all characters (letters, numbers, and symbols) using the standard tap method. Other text modes let you easily enter numbers or insert text already stored on your phone. Finally, a predictive text mode lets you enter text messages with a minimum of keypresses.
Entering Text Tap Method Tap method is the default standard mode for entering text on your phone. To activate tap method from any text entry screen, press M and select the Tap Method menu option. To enter text using the tap method: Do This 1 Press a number key one or more times 2 Continue to press number keys 3 Press OK (+) To cycle through the characters associated with the key and select the character you want (see the “Character Chart” on page 39).
Entering Text General Text Entry Rules Press a number key to enter text at flashing cursor location. Press a number key as many times as necessary to enter the desired character. Press and hold a number key to cycle between uppercase and lowercase characters. )Msg ) ) )CANCEL) BROWSE Move flashing cursor up or down one line in text message, or change a character in a block cursor to uppercase or lowercase. Move flashing cursor to the left or right in text message.
Entering Text • If you do not press a key for two seconds, the character in the block cursor is accepted, and the cursor moves to the next position. • The first character of every sentence is capitalized unless you manually change it. (Hold the number key or press S down to force the character to lowercase while it is highlighted by the block cursor.) Character Chart Use this chart as a guide for entering spaces, numbers, letters, symbols, and other characters with the tap method.
Entering Text Predictive Text Entry with iTAP™ Software iTAP™ software provides a predictive text entry method that lets you enter the letters of a word using only one keypress per letter. You must activate iTAP software prior to entering letters. You can do this from any text entry screen by pressing M to open the Entry Method menu and selecting the iTAP menu option.
Entering Text Do This To 4 Press SELECT (+) add the highlighted word to the text area at the top of the display A space is automatically inserted after the word. For example, to spell the word “act,” press 2 2 8. The display shows: Flashing cursor indicates insertion point. Cat Act Bat Abu DELETE } Press * and # to scroll and see additional word choices. SELECT Press DELETE (-) to clear Press SELECT (+) to insert the the last letter entered. highlighted word at the insertion point.
Entering Text Do This 2 Press * or # To highlight the letter or letter combination 3 Press shift the text entry cursor to the left SELECT (+), then and “lock” the selected portion of the word press * 4 Continue entering letters and highlighting letter combinations spell the word Punctuation The iTAP software automatically adds a space after each word. When you enter punctuation, this space is removed.
Entering Text Enter Numbers To enter a number in iTAP mode: Do This 1 Enter the first digit and then highlight it 2 Press number keys 3 Press SELECT (+) To put the iTAP software in number entry mode add digits to the number enter the number at the insertion point Delete Letters and Words Place the cursor to the right of the text that you want to delete, and then do the following: Do This Press DELETE (-) Continue to hold DELETE (-) To delete one letter at a time delete the entire message 43
Recent Calls You can use the recent calls menu to view received calls or dialed calls, retrieve the last number stored in the notepad, and view or reset call times. Viewing the Received Calls or Dialed Calls List Your phone keeps lists of the numbers from calls you recently received and dialed, even if the calls did not connect. The lists are sorted from newest to oldest entries. The oldest entries are deleted as new ones are added.
Recent Calls Press 4 N To call the entry’s number Tip: Press and hold N for two seconds to send the entry’s number as DTMF tones. To activate DTMF tones, see “Adjusting the DTMF Setting” on page 133.
Recent Calls The Last Calls Menu includes the following options: Option Store Description Create a phonebook entry with the selected number in the No. field. (This option is not available if STORE appears above the + key, or if the number is already stored as a phonebook entry.) Delete Delete the entry. (This option is not available if DELETE appears above the key.) Delete All Delete all entries in the current list. Send Message Create a new text message, with the selected number in the Tel No. field.
Recent Calls Using the Notepad Your phone uses a notepad to store the most recent string of digits entered—either for a phone number that you called or for a number that you entered but did not call. To call the number stored in the notepad, press N from the idle display. To create a phonebook entry or perform other operations with the number: Find the Feature M > Recent Calls > Notepad Press To open the Dialing Menu (to attach a number or insert a special character).
Recent Calls Call Times Your phone tracks and records call times. Use the recent calls menu to view and reset a call timer. Network connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing O. This time includes busy signals and ringing. The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider.
Recent Calls Viewing and Resetting Call Times To view a call timer: Find the Feature M > Recent Calls Press 1 S To scroll to Call Times 2 SELECT (+) open the list of timers 3 S 4 SELECT (+) scroll to the timer you want view the recorded time To reset the call timer: Press 1 RESET (+) To reset the time (if available) 2 YES (-) confirm the reset 49
Phonebook You can store a list of names and phone numbers or email addresses in your phone’s electronic phonebook. You can view these entries and call them directly from your phone. For email addresses, you can send a text message directly from your phone. To see the list of names stored in your phonebook, press M > Phonebook from the idle display. Scroll to a name and press VIEW (+) to view details of the phonebook entry as shown in the following display.
Phonebook Shortcut: Enter a phone number in the idle display, then press STORE (+) to create a phonebook entry with the number in the No. field. Go directly to step 3 in the following procedure to enter additional information and store the entry.
Phonebook Press 10 S To scroll to the type of phone number 11 SELECT (+) select the number type 12 RECORD (+) record a voice name for the entry, if desired or 13 Go to step 13 if you do not want to record a voice name for the entry See “Recording a Voice Name For a Phonebook Entry” on page 53. S scroll to Speed No., the number to speed dial the entry 14 CHANGE (+) 15 keypad keys 16 OK (+) The next available speed dial number is assigned to a new phonebook number by default.
Phonebook Press 17 SELECT (+) To select MORE if you want to create another entry with the same Name Note: You must enter a name and number to use this option. Complete Phonebook Entry When you are finished entering information for a phonebook entry: Press DONE (-) To store the entry and return to the phonebook list Recording a Voice Name For a Phonebook Entry You can record a voice name when you create a new phonebook entry, or when you edit a previously stored phonebook entry.
Phonebook Do This 1 Press S 2 Press VIEW (+) To scroll to the entry that needs a voice name display the entry’s detailed view 3 Press EDIT (+) edit the phonebook entry 4 Press S scroll to Voice Name 5 Press RECORD (+) begin the recording process 6 Press and release the voice key on the right side of your phone and say the entry’s name (in two seconds) 7 Press the voice key and repeat the name The phone displays Press Voice Key then say name.
Phonebook Phonebook List To call a number or send email to an entry in the phonebook list: Find the Feature M > Phonebook Press 1 S To scroll to the entry you want to call 2 N send the call (for a phone number) or open a new message form with the entry’s address in the To field (for an email address). Voice Dial To call a number or send an email using voice dial: Do This Press and release the voice key on the right side of your phone and say the entry’s name (in two seconds).
Phonebook Press 1 S To scroll to the entry you want to edit 2 VIEW (+) display the entry’s detailed view 3 EDIT (+) edit the phonebook entry Edit a phonebook entry by following the procedures described in “Storing a Phonebook Entry” on page 50.
Phonebook Press 1 M 2 S To open the Phonebook Menu scroll to Ph Book Capacity 3 SELECT (+) select Ph Book Capacity The phone displays the number of entries that are in use and the number that are empty. Synchronizing with TrueSync Software You can synchronize phonebook entries between your phone and computer or hand-held device with Starfish TrueSync® software, a Motorola accessory product. See the TrueSync user guide for more information.
Phonebook Press 2 S To scroll to Setup 3 SELECT (+) select Setup 4 CHANGE (+) select Sort by 5 S 6 SELECT (+) scroll to the entry you want select the entry you want Troubleshooting You may encounter some errors while working with your phonebook. This section describes some common problems and their resolutions.
Phonebook Problem Unacceptable Voice Sample Resolution After the phone When you record a voice name for a displays this error, it phone number or email address, the gives you a second chance to record the phone prompts you if it does not voice name. If it still capture an adequate voice sample cannot capture a sample on the second try, it cancels the recording and returns to the phone number or email address details. From here, you can try to record the name again.
Quick Dial Your service provider may program one or more quick dial numbers into your phone. These easy-to-dial numbers usually include the customer service number. Your service provider may call this feature another name, and may charge for these calls. Dialing a Quick Dial Number Find the Feature M > Quick Dial If the phone displays No Quick Dial Number Stored, see “Storing a Quick Dial Number,” below.
Quick Dial The phone displays No Quick Dial Number Stored.
Radio You can use your phone to tune, store presets, and listen to FM radio stations when the optional Motorola Original™ FM Stereo Radio Headset accessory is plugged into the phone’s accessory connector port.
Radio Tuning a Station To tune a radio station with the radio on: Do This Press S or Press and hold S To scroll up or down to the next frequency scroll up or down to the next available stereo station Storing a Preset To store a station to a preset that you can recall later: Do This Press and hold a number key (1 to 9) To assign its preset number to the tuned station Selecting a Preset To select a preset radio station: Press a number key (1 to 9) To tune the station stored at that preset location 63
Radio Sending and Receiving Calls with the Radio On Your phone interrupts the radio signal and rings or vibrates as usual to notify you of an incoming call, message, or other event.
Messages—Voicemail You can listen to your voicemail messages by calling your network voicemail phone number. Voicemail messages are stored on the network—not on your phone. Contact your service provider for more details. Storing Your Voicemail Number Store your voicemail number in your phone to make it faster and easier to use voicemail. Your voicemail number is provided by your service provider.
Messages—Voicemail From the new message notification: Do This Press CALL (+) To call your voicemail phone number and listen to the message Listening to a Voicemail Message To listen to your voicemail messages at any time: Find the Feature M > Messages > VoiceMail Your phone calls the voicemail phone number you stored. If you do not have a voicemail number stored, the phone guides you through storing a number.
Messages—Text Your phone can receive text messages which may include text, phone numbers, and URLs. Your phone stores these messages in a text inbox. Using Text Messages Text messages are brief messages that you can send and receive (such as Where are we meeting?). Received messages appear on your phone display or in your text message inbox. The number of messages the inbox can hold depends on the length of the messages, and the number of other messages and drafts stored in your phone.
Messages—Text Setting Cleanup Description How many days your phone waits or how many messages it keeps before it automatically deletes messages that are read and unlocked To set up the text message inbox: Find the Feature M > Messages M > Text Msg Setup Press 1 S To scroll to Expire After 2 CHANGE (+) 3 keypad keys change the Expire After period 4 OK (+) enter the expiration period—the number of days your network tries to send unreceived messages store the expiration period 5 CHANGE (+) change th
Messages—Text Press 10 DONE (-) To store the custom cleanup period after you finish entering all information Receive a New Text Message Note: You must set up the text message inbox before you can receive text messages. See “Set Up the Text Message Inbox” on page 67. When you receive a new message, your phone displays New message X and gives an alert.
Messages—Text If you want to save a message, you should lock it to prevent it from being overwritten as new messages are received.
Messages—Text Option Lock/Unlock Delete or Delete All Store Number Store Address Create Message Setup Description Lock or unlock the message Delete the message or all inbox messages Press Yes (-) to confirm the deletion. Open a new phonebook entry with the message’s embedded number in the No.
Messages—Text Press 1 CHANGE (+) 2 keypad keys To select To enter one or more phone numbers or email addresses where you want to send the message Tip: Remember to press and hold 1 to add a space between phone numbers/addresses that you enter manually.
Messages—Text Press 10 CHANGE (+) 11 keypad keys To select Call 12 OK (+) enter the number you want your recipient to call back (the message’s From field) store the number 13 DONE (-) finish the message Your phone displays Send Message Now? 14 YES (-) send the message or NO (+) cancel the message or save it as a draft A saved message is stored in the drafts folder, where you can edit it and send it at a later time.
Messages—Text Press 2 M To open the Quick Note Menu to perform other procedures as described in the following list The Quick Note Menu includes the following options: Option New Edit Delete Send Description Open an editor where you can create a new quick note. Enter text and press OK (+) to save it as a quick note. Open an editor where you can edit the selected quick note. Edit the quick note text and press OK (+) to save your changes. Delete the selected quick note.
Messages—Text Read, Send, or Delete a Draft Text Message You can save unsent messages to your drafts folder. See “Sending a Text Message” on page 71. You can read, edit, or send draft messages whenever you like: Find the Feature M > Messages > Drafts Press 1 S To scroll to the message you want 2 SELECT (+) open the message For a description of details or to send the message, see “Sending a Text Message” on page 71.
Messages—Text Read, Resend, or Delete an Outbox Text Message Your phone’s outbox stores copies of the text messages you send. You can open the outbox to re-read messages, re-send them, and check their status (sending, sent, failed). Note: Every five minutes, your phone automatically resends any undelivered messages in the outbox. When it succeeds, it displays a Sent Message confirmation.
Messages—Text Option Delete or Delete All Message Status Create Message Setup Description Delete the message or all messages in the outbox Press YES (-) to confirm the deletion Open the status display for the message and list the status for each recipient Open a new text message Open the outbox setup menu Set Up Outbox Text Message Cleanup In your text message outbox, you can set cleanup preferences that tell your phone how long to wait or how many messages to keep before it starts deleting the oldest m
Messages—Text Press 2 SELECT (+) To select the cleanup period Note: If you select Custom: • Press S to change the entry in the active field. • Press * or # to switch between the two fields. Receiving Browser Alerts Your network’s Web server can send you special messages called browser alerts that you can read in your browser. Read a New Browser Alert Message When you receive a browser alert message, your phone displays New Browser Message X.
Messages—Text View Browser Alert Messages To view your browser alert messages at any time: Find the Feature M > Messages > Browser Alerts Your phone launches the browser and displays a list of the browser alert messages you have received.
Messages—Text Message Center Overall Memory You can quickly check the total message center memory available. Find the Feature M > Messages M > Memory Meter The phone displays the memory meter gauge, which indicates the amount of memory in use. Msg Memory Meter - + BACK Message Center Cleanup In your text message inbox, you can set cleanup preferences that tell your phone how long to wait or how many messages to keep before it starts deleting the oldest messages.
Messages—Text Troubleshooting You may encounter errors when working with your messages. This section describes some common errors and their resolutions. Problem Cannot Delete a Locked Message You cannot delete a locked message. No Reply Address You cannot reply to a message that has no reply address. Unable to Send Network conditions prevent your phone from sending a message when you tell it to. Message Too Long Your message is too long for the current network to send (length limits vary by network).
Messages—Text Problem Memory is low Resolution Run an overall message center cleanup. See “Message Center Cleanup” on page 80. A new message fills your phone’s memory to 85% of its capacity. If your memory is still full, the X (text message) icon flashes at the top Memory is full of your idle display. To check your A new message fills message memory, see “Message your phone’s memory Center Overall Memory” on page 80. to full capacity.
Shortcuts Your phone includes several pre-programmed shortcuts. You can create additional shortcuts, if you like, to mark frequently used menu items. Standard Shortcuts The following shortcuts are pre-programmed in your phone. You cannot edit or delete these shortcuts. Do This Press M, then press and hold M (within two seconds) Press M * Press M # Press N To zoom in/out your phone’s display view (See “Changing the Zoom Setting” on page 131.
Shortcuts Help for Creating a Shortcut Find the Feature M > Shortcuts > New Shortcut The phone displays instructions for how to set shortcuts. Press S to scroll through the instructions. Creating a Shortcut You can assign a keypad shortcut, or both a keypad shortcut and a voice shortcut to a menu item. A voice shortcut lets you go directly to a menu item by saying its shortcut name. Tip: Make your voice recording in a quiet location.
Shortcuts Do This 3 Press and hold M To open the shortcut editor The phone displays: Assign Shortcut for: ÒItemÓ? where Item is the name of the item you selected.
Shortcuts Do This 7 Press and release the voice key on the right side of your phone and say the shortcut’s name (in two seconds) To record the shortcut name 8 Press and release the voice key and repeat the name confirm the shortcut name Shortcut 9 Press DONE (-) close the shortcut editor The phone displays Press Voice key then REPEAT voice shortcut. The phone displays Trained: Voice Shortcut Setup Errors You may see one of the following types of error messages when you set up a shortcut.
Shortcuts Press YES (-) to assign the key to the new shortcut, or press NO (+) to return to the previous display. Shortcuts Full If you try to store a new shortcut when the shortcut positions have all been filled, your phone displays Shortcuts Full. You must delete a shortcut before you create a new one. Storing a Shortcut Without a Position Number If you try to store a shortcut without a key, your phone displays Shortcut Key No. Required and returns you to the shortcut menu.
Shortcuts Tip: Make your voice recording in a quiet location. Hold the phone about 4 inches from your mouth, and speak directly into the phone’s microphone in a normal tone of voice. Similar Voice Shortcut When you record a voice shortcut, your phone compares it to other voice shortcuts. If it is similar to another one, your phone might confuse the two. The phone displays Similar Voice S-Cut Stored. Try Again. Try the voice shortcut again, but with a different recording.
Shortcuts Use a Voice Shortcut To use a voice shortcut: Do This 1 Press M To open the menu 2 Press and release the voice key on the right side of your phone and say the shortcut’s name (in two seconds) go to the menu item, or perform the menu action Note: If you speak a voice shortcut and your phone plays back the wrong shortcut, press CANCEL (-) to cancel the shortcut, or press the voice key to find the next match.
Shortcuts Voice Shortcut Not Recognized If you use a voice shortcut and your phone does not find a match, the phone displays Repeat Shortcut. Repeat the shortcut. If your phone does not recognize the shortcut after the second attempt, it displays Voice Shortcut Not Found and returns you to the previous display. Your phone displays a second recognition tip, such as Say Shortcut Louder if it detects your voice at too low a volume. Try the shortcut again, following the display directions.
Shortcuts Reordering Shortcuts Once you create some shortcuts, you can change the order in which they are listed. Note: The shortcut list is sorted by key. If you change a shortcut’s place in the list, you change its key.
Shortcuts Press 3 S To scroll to Delete 4 SELECT (+) select Delete 5 YES (-) The phone displays Delete item Shortcut? where item is the name of the shortcut.
Shortcuts Press 8 SELECT (+) To select Delete The phone displays Delete Voice Shortcut? 9 YES (-) confirm the deletion Delete All Shortcuts Find the Feature M > Shortcuts M > Delete All Press YES (-) To confirm the deletion and return to the shortcuts menu 93
Voice Notes The voice note feature lets you record personal messages or phone calls. You can play back a voice note at any time. There are no pre-recorded voice notes on your phone. Recording a Voice Note Use this procedure to record a voice note when the idle display is visible, or use it during a phone call to record the call. Your phone plays an alert tone to notify the other party that the call is being recorded.
Voice Notes Do This 3 Release the voice key to stop recording. Result The phone displays the voice notes list number and the total recording time. Viewing the Voice Notes List The voice notes list shows all your voice notes along with other important information and features.
Voice Notes Press 1 S To scroll to the voice note 2 PLAY (+) play the voice note When an optional Motorola Original™ headset accessory or FM Stereo Radio Headset accessory is connected to your phone, voice note playback is automatically routed to the headset. Tip: You can play a voice note while taking a call. It won’t be transmitted to the other party. Playback Screen While the voice note is playing, the playback screen is displayed.
Voice Notes Voice Note Controls While playing back a voice note, press these keys to do the following: Stop playback and go to Voice Notes Menu. Raise or lower playback volume of voice note. Stop playback and return to voice notes list. If the voice note is unlocked, stop playback and display Delete Voice Note? If the voice note is locked, stop playback and unlock voice note. Stop playback and scroll up/down to next voice note. Press any number key to alternately stop and start playback.
Voice Notes Locking and Unlocking a Voice Note You can prevent a voice note from being accidentally deleted by locking it. To delete a locked voice note, you must first unlock it. Find the Feature M > Voice Notes Press 1 S To scroll to the voice note you want to lock or unlock open the Voice Notes Menu scroll to Lock or UnLock 2 M 3 S 4 SELECT (+) lock or unlock the voice note You can also lock or unlock a voice note while playing it back.
Voice Notes Deleting a Voice Note You can delete a single unlocked voice note or all unlocked voice notes. To delete a locked voice note, you must first unlock it. See “Locking and Unlocking a Voice Note” on page 98. Notes: • You can always press NO (+) to cancel a deletion. • A deleted voice note cannot be recovered.
Voice Notes Press 2 S To scroll to Delete All 3 SELECT (+) select Delete All The phone displays Delete All Voice Notes? 4 YES (-) delete all unlocked voice notes Voice Note Memory To check the available memory and to delete old voice notes: Find the Feature M > Voice Notes Press 1 M To open the voice notes menu scroll to Memory 2 S 3 SELECT (+) display the voice notes memory meter 4 DELETE (+) delete all voice notes (optional) 5 YES (-) Note: Locked voice notes are not deleted.
Micro-Browser The micro-browser lets you access Web pages on your phone. Contact your service provider to set up access, if necessary. Starting a Micro-Browser Session To open the micro-browser: Find the Feature M > Browser The micro-browser displays the home page set up by your service provider. Press 1 S To scroll to a bookmark or service 2 SELECT (+) select the service Note: If you are unable to establish a network connection with the micro-browser, contact your service provider.
Micro-Browser Do This To Press S to scroll to a call the number from the micro-browser phone number on a Web page, then press N Press * go back to the previous Web page Error Messages You may not be able to connect to a micro-browser service. Following are some possible error messages: Message Browser not available Home Page not available Home Page not setup Packet Data network not available. Attempt Direct Data Call? 102 Meaning Your phone is unable to make a network connection.
Ring and Vibrate Features Your phone rings or vibrates to notify you of an incoming call, message, or other event. This ring or vibration is called an alert. You can use a standard alert for all events, or set different alert types for different events.
Ring and Vibrate Features Select a Ring/Vibration for a Specific Event You can select the alert that your phone uses for a specific event (such as an incoming call) from 32 different preset tones and vibrations. When you select a ring or vibration alert for a specific event, it overrides the default alert set for all events.
Ring and Vibrate Features Press 1 S To scroll to the reminder alert you want: Beep, Vibrate, or Off Beep or Vibrate sets the 2 SELECT (+) corresponding reminder alert type. Off turns off all reminders. select the reminder alert Setting Ringer or Keypad Volume You can adjust your phone’s ringer volume, and the volume level of the sound you hear when you press a keypad key.
Phone Status The phone status menu lets you view your phone number, battery meter, and other phone status information. Displaying Your Phone Number Find the Feature M > Settings > Phone Status > My Tel. Number The phone displays your phone number. Shortcut: Press M # to see your phone number. Changing the Phone Number Display You can view and change the way your phone number is displayed at any time. Find the Feature M > Settings > Phone Status > My Tel.
Phone Status Displaying the Battery Charge Level The battery meter on your phone display provides basic information about the battery charge level. A more detailed display is provided with the phone status battery meter. Find the Feature M > Settings > Phone Status > Battery Meter The phone displays the battery meter. The more shaded segments, the greater the charge.
Data and Fax Calls A Motorola Original™ data kit lets you transfer data between your phone and a computer or other external device. You can: • synchronize data between your phone and an external device with Starfish TrueSync® software, a Motorola accessory product. See the TrueSync user guide for more information. Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products.
Data and Fax Calls Notes: • Check your computer or hand-held device to determine the type of cable you need. • To conserve power, some laptops deactivate unused serial ports. If this happens, open an application that uses the serial port, like fax or dial-up networking, and your computer will automatically activate the port. Attaching a Serial Cable Use the interchangeable head on the Motorola Multi-Connect Serial Cable to connect a computer, Palm III device, or Palm V device to your phone.
Data and Fax Calls Do This 2 With the Motorola logo and the phone both facing you, plug the detachable head into your phone’s accessory connector port. 3 Plug the other end of the cable into the serial interface connection on the external device and tighten the screws. Attaching a USB Cable Do This 1 Plug the end of the cable with the Motorola logo into your phone’s accessory connector port. Make sure that the logo and the phone are both facing you.
Data and Fax Calls Install the Software Install the software from the CD-ROM that comes with your Motorola Original data kit. See the data kit’s user guide for more information. Sending a Data or Fax Call You can connect your phone to a computer or hand-held device to send data or a fax from the connected device. Use this feature to transfer data from your computer onto another device, and to synchronize phonebook information between your phone, computer, and/or hand-held device.
Data and Fax Calls Receiving a Data or Fax Call You can connect your phone to a computer or hand-held device to receive data or a fax. Use this feature to transfer data to your computer from another device. Set Up Your Phone Before you receive a data or fax call, you must configure your phone for the incoming call type and connect the phone to the device that will receive the call.
Data and Fax Calls Transfer the Data or Fax Your phone notifies you when the data or fax call arrives, and transfers the call to the connected device. You must use the application running on the connected device to answer the call. End the Data/Fax Connection When the data or fax transfer is complete: Do This End the call from the connected device To close the connection Reset Normal Voice Operation After you receive a data or fax call, you must reset your phone to resume normal voice operations.
In-Call Setup Use the in-call setup menu to set the features that are active during a call, such as the in-call timer and call answering options.
In-Call Setup Press 1 S To scroll to a beep interval or Off 2 SELECT (+) select the option 3 keypad keys 4 OK (+) If you select a beep interval, your phone beeps once when a call reaches the interval. enter any number of seconds (1-999) for your beep interval store the interval For information on how to use these features, see “Using the In-Call Timer” on page 34. Setting Answer Options You can set up your phone to answer a call when you press any key (Multi-key).
Security Assigning a New Code or Password Your phone’s four-digit unlock code is originally set to 1234, and the six-digit security code is originally set to 000000 at the factory. Your service provider may reset these numbers before you receive your phone. If your service provider has not reset these numbers, we recommend that you change them to prevent other users from accessing your personal information or modifying your phone settings.
Security Press 1 S 2 CHANGE (+) 3 keypad keys 4 OK (+) 5 keypad keys 6 OK (+) 7 keypad keys 8 OK (+) To scroll to the code or password you want to change select the code or password enter your old code If you do not know your code, see “If You Forget a Code or Password” on page 117. submit your code enter the new code assign the new code re-enter the new code confirm the new code If You Forget a Code or Password If you forget your security code (originally set to 000000), contact your service provider.
Security Locking and Unlocking Your Phone You can lock your phone manually or set your phone to lock automatically whenever you turn it off. When you try to use a locked phone, it asks you to enter the unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you must unlock it to answer. You may be able to make emergency calls on your phone even when it is locked. See “Dialing an Emergency Number When Your Phone is Locked” on page 20.
Security Unlock Your Phone At the Enter Unlock Code prompt: Press 1 keypad keys To enter your four-digit unlock code 2 OK (+) The unlock code is originally set to 1234. If necessary, see “If You Forget a Code or Password” on page 117. unlock your phone Locking and Unlocking Your Keypad You can lock your phone keypad to prevent accidental use.
Security Notes: • You can still place calls to emergency numbers when outgoing calls are restricted. • Your phone still receives incoming text messages when incoming calls are restricted.
Security Locking and Unlocking Applications You can lock many phone applications (for example, the phonebook) so that users must enter the unlock code to use them.
Personalized Settings User-settable phone options are set to their default values when you receive your phone. You can use the default settings or adjust phone features to your own preference. Changing the Wake-up Greeting When you turn on your phone, it greets you with a text message. You can personalize this wake-up greeting to say whatever you like.
Personalized Settings Press 1 keypad keys To enter the banner text 2 STORE (+) The banner field is one line and contains 12 characters. store the banner Changing the Quick Dial Number Your service provider may program one or more quick dial numbers (such as a customer service number) into your phone. The service provider can either block user access or allow you to edit the quick dial number.
Personalized Settings Reordering Menu Items You can customize the order of the items in your phone’s main menu, depending upon your usage.
Personalized Settings Press 4 CHANGE (+) To confirm the new function The key will have the new function whenever the phone is idle.
Initial Setup This chapter covers the phone settings that you may want to change as soon as you begin using your phone. These settings help you get started quickly and easily.
Initial Setup Press 1 S To scroll to the current date setting 2 CHANGE (+) 3 keypad keys change the date setting 4 } (+) 5 keypad keys 6 } (+) 7 keypad keys 8 DONE (-) 9 S 10 SELECT (+) enter the month or day (depending on your date format) move to the day or month (depending on your date format) enter the day or month (depending on your date format) move to the year enter the year store the date scroll to Format change the date format to mm/dd/yy, dd/mm/yy, or month abbreviation Setting a Language
Initial Setup Press 1 S 2 SELECT (+) To scroll to the preferred language setting confirm the new language setting Note: All languages are listed with spelling and characters that are unique to the language. For example, Spanish is listed as Español and Turkish is listed as Türkçe. Setting Automatic Redial When you turn on automatic redial, your phone automatically redials calls that fail due to network conditions.
Initial Setup To enter or change a PIN and configure your phone to dial automatically: Find the Feature M > Settings > Other Settings > Initial Setup > Auto PIN Dial Press 1 CHANGE (+) 2 S 3 SELECT (+) 4 keypad keys 5 DONE (-) To change the current auto PIN dial setting toggle the auto PIN dial feature to On select the auto PIN dial setting The phone displays the PIN entry prompt.
Initial Setup Adjusting the Display Contrast You can adjust the contrast between the text and the background in your phone’s display. To adjust the contrast: Find the Feature M > Settings > Other Settings > Initial Setup > Contrast Setting Press 1 * or # 2 OK (+) To set contrast to lighter or darker store the new setting Adjusting the Display Backlight A backlight turns on to illuminate the display whenever you use your phone.
Initial Setup Changing the Zoom Setting You can set your phone’s display to show either three lines or two lines of text plus soft key labels. Three lines of text display more information, while two lines increase text size. Shortcut: To change the display view, press M once, then press and hold M again within two seconds of the first press.
Initial Setup To change the scrolling behavior: Find the Feature M > Settings > Other Settings > Initial Setup > Scroll Press 1 S 2 SELECT (+) To toggle between Up/Down or Wrap Around confirm the new setting Turning Animation On and Off Animation provides smooth scrolling within and between text fields, and it highlights menu selections and soft key choices. When animation is turned off, the cursor jumps from field to field, rather than moving between them. Some items do not flash.
Initial Setup Adjusting the DTMF Setting Your phone transmits dual tone multi-frequency (DTMF) tones when you press a key on the keypad. These tones are used to communicate with automated systems, such as credit card entry, password entry, or number linking. Your phone can send DTMF tones to the network in long or short form. The long form transmits tones for as long as you press a key.
Initial Setup Press 1 keypad keys 2 OK (+) To enter your security code send your security code 3 YES (-) The phone displays the Reset All Phone Settings? message. reset all phone settings The phone briefly displays a Completed: Phone Settings message and returns you to the Initial Setup menu. Clearing All Stored Information Use the master clear feature to reset all user-selectable options, clear the resettable timers and recent call lists, and erase all phonebook information.
Initial Setup Press 2 OK (+) To send your security code 3 YES (-) The phone displays the Clear All Phone Data? message. clear all stored data The phone briefly displays a Completed: Phone Settings message and returns you to the Initial Setup menu.
Network Services Your service provider has registered your phone to its network. In some situations, such as using the phone as a wireless modem or connecting it to a TTY device, you may need to change the network registration. Note: Some settings and/or options described in this section may not be available for all phone models.
Network Services To select only analog channels: Find the Feature M > Settings > Other Settings > Network > Analog Only Press 1 S To scroll to On or Off 2 SELECT (+) confirm the selection Setting the Search Mode This option lets you determine the type of network search that your phone performs: Find the Feature M > Settings > Other Settings > Network > Set Mode Press 1 S To scroll to an option in the list 2 SELECT (+) See the table that follows this procedure for an explanation of the options.
Network Services Setting Standard Scans for networks automatically based on priority Adjusting Service Status When this feature is set to automatic, the network automatically transmits service updates to your phone.
Network Services Setting the Call Drop Alert Some phones use call drop, which produces an audible tone whenever the network has just dropped a call. Because digital networks are so quiet, the call drop alert may be your only indication that a call has been dropped.
Hands-Free Use You can purchase an optional Motorola Original™ hands-free car kit or headset for your phone. These accessories provide alternative ways for you to use your phone without using your hands. Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
Hands-Free Use Automatic Hands-Free You can set up your phone to automatically route calls to a car kit when it detects a connection. Find the Feature M > Settings > Other Settings > Car Settings > Auto Handsfree Press 1 S To scroll to On or Off 2 SELECT (+) confirm the setting Power-Off Delay When your phone is connected to a car kit, you can set it to stay on for a specified time period after you switch off the ignition.
Hands-Free Use Find the Feature M > Settings > Other Settings > Car Settings > Power-off Delay Press 1 S 2 SELECT (+) To scroll to the time delay option you want confirm your selection Caution: If you select Continuous, the phone does not power off when you turn off the ignition. Be careful not to accidentally drain your car battery if you select this option.
Glossary A AC adapter An accessory device that allows you to power your phone and charge any attached batteries from a wall outlet. accessory connector port A socket on the bottom of the phone where you can attach accessories such as an AC adapter, battery charger, vehicle power adapter, or optional accessories. add digits You add digits to the end of a number. See also: attach number. air-time The amount of time you spend using a wireless system.
Glossary attach number You attach a number from the phonebook or recent calls list to prefix digits that you entered in the idle display. See also: add digits. auto answer When you activate this feature, your phone automatically answers after two rings. automatic handsfree Routes the phone’s sound to an attached speakerphone. You can use this with the auto-answer feature for hands-free phone use in your car.
Glossary browser See: micro-browser. C call back number A phone number in a text message, provided by the sender. call drop tone Produces an audible tone if the network drops a call (optional feature available on some phones). call waiting A feature that lets you answer a call if it arrives while you are already on a call. With call waiting, you can put the first call on hold while you take the second one.
Glossary You can specify how many days your phone waits or how many messages are kept before your phone runs cleanup (you can also run clean up manually). cold transfer Sends an active call directly to another phone, without giving you the chance to speak to the person on the target phone. conference call A digital network feature that lets you link several calls so that everyone can participate in a single conversation. For analog networks, see: three-way call.
Glossary display card Browser information delivered in text form, without line breaks or punctuation. drafts folder Text messages that you have written but have not sent yet. DTMF tones See: Dual Tone Multi-Frequency tones. Dual Tone Multi-Frequency (DTMF) tones The tones that your telephone transmits when you press a keypad key. These tones are used to access automated calling systems such as voicemail, paging services, and banking-by-phone.
Glossary F flashing cursor A blinking vertical line that indicates the current text entry position in a text message. See also: block cursor. form A group of related input fields. fringe area The outermost range of a wireless system where signals are weak. H hands-free mode A mode where your phone sends and receives sound through an external speakerphone or headset rather than its internal microphone and earpiece. It is for use in situations like driving, where you need both hands free.
Glossary in-call Relates to things that happen during an active call (or features that are available during an active call). indicator A symbol on your phone that gives you information about your phone’s status. info on demand See: interactive services. instant redial This feature enables your phone to redial when your wireless network is temporarily unable to handle your call. Your phone automatically attempts the call for four minutes or until it is picked up by the network.
Glossary Lithium Polymer A battery technology used in personal wireless telephones. lock Use this feature to prevent unauthorized access to your telephone. M master clear Resets all user-selectable options back to their original factory settings (except for the unlock code and security code). This also clears your resettable timers, phonebook, and recent calls lists. See also: master reset.
Glossary multi-key If activated, this feature lets you answer incoming calls by pressing any key. N n A special character in a series of digits that tells your phone to prompt you for a number before it sends the remaining digits in the series. network All phones register to a network in order to place and to receive calls. network connection time The elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing O.
Glossary Outbox Stores your most recent sent messages. You can look in the outbox to re-read messages and check their status—read, sent, sending, or failed. You can even re-send them. P pause A special character in a series of digits that tells your phone to wait until a call connects before sending the remaining digits in the series. Personal Identification Number (PIN) Password required to dial certain numbers on some analog networks, or to access some VoiceMail or bank-by-phone features.
Glossary power-off delay Leaves your phone on for a while after you turn off your vehicle’s ignition. If you make short stops, you don’t have to reenter the unlock code each time you turn on the ignition. This also ensures you do not leave the phone on indefinitely and drain the vehicle’s battery while the ignition is off. prompt A message requesting input. Q quick dial Lets you quickly dial pre-programmed numbers.
Glossary recent calls lists This includes the received calls and dialed calls lists. See also: received calls, dialed calls. received calls The list of numbers for calls that you most recently received—both calls that you answered and calls that you missed. received calls timer The total amount of time you spent on all received calls, since the last time you reset this timer. Also see timer.
Glossary service provider A company affiliated with a wireless carrier that provides wireless service to its customers. service tones Two short beeps used to alert you when your network registration status changes (optional feature available on some phones). shortcut A voice cue or key combination that instantly accesses a frequently used menu item. You can define shortcuts. signal The radio waves that carry information between your phone and the wireless network.
Glossary speed dial Lets you call any phonebook entry just by entering the one-, two-, or three-digit phonebook entry number, then pressing and holding N. standby mode Your phone may turn off the backlight to save power when in standby mode. The backlight comes back on whenever you press a key. standby time The length of time your phone is on but not used for talking. status indicator See: indicator. status light The light on top of your phone that indicates your current type of service and message status.
Glossary timer Tracks the amount of time you spend on calls. Time is broken down into five different categories. See: dialed calls timer, received calls timer, all calls timer, and lifetime timer. See also: cost tracker. title (interactive services) You can enter an interactive service’s title as a shortcut to opening the service. toggle To switch between two possible options, for example: on versus off. tones See: Dual Tone Multi-Frequency tones.
Glossary voice name You can record a voice name for a phonebook entry. This lets you call the entry just by saying the name from your phone’s idle state. voicemail Stores voice messages left by people who called you. voice note A recording of a note or personal phone call for playback. volume keys Located on the side of your phone, the upper and lower volume keys are used to adjust phone volume.
Index A B accessories, optional 10, 62, 96 Add Digits feature 31, 46 alert beep alert 114 defined 103 event alert 104 indicators 103 reminders, selecting 104–105 setting 103 timer alert 114–115 alert setting indicator, defined 103 animation setting 132 answering machine, calling 24–26 antenna 17 application, locking and unlocking 121 area code, attaching to phone number 28 Attach Number feature 28–30, 46 auto PIN dial 128 automatic redial setting 128 using 19 backlight 130 banner text 122 battery battery
Index call (continued) fax call 34, 108–113 muting 33 placing 17 receiving 18 sending 17 terminating 21 three-way call 33 unanswered call 20 call drop alert defined 139 setting 139 Call Failed message 19 call timers described 48 resetting 49 viewing 49 call waiting, using 32 caller ID 19, 20 calling card calls 24–26 calling line identification. See caller ID car kit automatic answer 140 automatic hands-free 141 charger time 142 power-off delay 141–142 charge level, battery 107 codes.
Index Drafts Menu 75 DTMF tones 34–35, 45, 46, 133 E email sending 71–73 storing address 50 emergency number 20 end key 17 ending a call 17 Enter Unlock Code message 117, 119 errors message 81–82 phonebook 58–59 event alert 104 external device connecting to phone 108–111 synchronizing data 57 F fax call connecting phone to fax machine 108–111 receiving 112–113 sending 111 FM Stereo Radio Headset 62–64, 96 H hands-free mode automatic answer 140 automatic call routing 141 charger time 142 defined 140 power
Index K M key end 17 left soft key 124–125 lock 119 menu 10 power 16 right soft key 124–125 send 17, 18, 44 voice 54, 94–95 keypad answering calls with 115 locking 119 volume, adjusting 105 making a call 17 master clear 134 master reset 133 menu customizing 124 display timers 114 Drafts Menu 75 entering text 36–43 key 10 Last Calls Menu 45–46 navigating 10 optional accessories, defined 10 optional features 10 Outbox Menu 76–77 Phonebook Menu 50 Quick Note Menu 74 rearranging features 124 Shortcut Menu 90
Index message (continued) locking 69–71 memory, checking 79–80 outbox 76–78 PIM synchronization 79 quick note 73–74 reading 69–71 receiving 69 reminders 65, 69 reminders, selecting 104–105 resend 76–77 sending 71–73 sent 76–77 status 76–77 text 67–82 troubleshooting 81–82 voicemail 65–66 micro-browser browser alerts 78–79 call a number from 102 defined 101 error messages 102 go back to previous page 102 interactions 101–102 starting 101 Missed Calls message 20, 26 mute defined 33 using 33 my telephone numb
Index P passwords changing 116 default 116 if you forget a password 117 pause character 24–26 Personal Identification Number 128 See also PIN personalized settings.
Index phonebook (continued) synchronizing entries 57 troubleshooting 58–59 voice name entry 53–54 voice name indicator 50 Phonebook Menu 50 PIM synchronization 79 PIN auto PIN dial 128 defined 35, 128 entering 35 power key 16 predictive text entry activating 40 capitalization 42 deleting text 43 entering numbers 43 entering words 40–42 punctuation 42 Q quick dial calling 60 number, changing 123 storing a number 60–61 quick note 73–74 Quick Note Menu 74 R radio 62–64 received calls.
Index S scroll setting 131 security code 117 send key 17, 18, 44 sending a call 17 service status 138 service tones 138 settings animation 132 auto answer 140 auto PIN dial 128 automatic redial 128 backlight 130 banner 122 battery save 132 call drop alert 139 contrast 130 date 126 DTMF setting 133 language 127 master clear 134 master reset 133 menu order 124 network 136–139 network service status 138 network service tones 138 quick dial number 123 scroll 131 soft keys 124–125 time 126 166 wake-up greeting
Index T U tap method text entry 37–39 text browse mode 36 changing text mode 36 character chart 39 entering from keypad 36–43 iTAP software predictive text entry 40–43 numeric mode 36 tap method 37–39 text message.
Index voice note deleting 99–100 locking and unlocking 98 memory 100 playback controls 97 playback screen 96 playing 95–97 recording 94–95 viewing voice notes list 95 Voice Notes Menu 95, 96, 97 voice shortcut creating 84–86 defined 84 voicemail 65–66 volume keypad 105 ringer 105 Z zoom setting 131 W wait character 24–26 wake-up greeting 122 Web pages interactions 101–102 viewing 101 wrap around, defined 131 U.S. patent Re.
series DIGITAL WIRELESS TELEPHONE 8988485L22-A
