Specifications

ManualsBrandsMotorola ManualsNetwork CardUSB08

100

Source Code Files

Contents

USB08 Evaluation Board Designer Reference Manual

MOTOROLA Source Code Files 91

#define UE1D3 _P(0x2B)

#define UE1D4 _P(0x2C)

#define UE1D5 _P(0x2D)

#define UE1D6 _P(0x2E)

#define UE1D7 _P(0x2F)

#define UE2D0 _P(0x30)

#define UE2D1 _P(0x31)

#define UE2D2 _P(0x32)

#define UE2D3 _P(0x33)

#define UE2D4 _P(0x34)

#define UE2D5 _P(0x35)

#define UE2D6 _P(0x36)

#define UE2D7 _P(0x37)

#define UADDR _P(0x38)

#define UIR0 _P(0x39)

#define UIR1 _P(0x3A)

#define UCR0 _P(0x3B)

#define UCR1 _P(0x3C)

#define USR0 _P(0x3D)

#define USR1 _P(0x3E)

//not implemented (0x3F)

// 16-Bit Registers:

#define TCNT _LP(0x0C)

#define TMOD _LP(0x0E)

#define TCH0 _LP(0x11)

#define TCH1 _LP(0x14)

//-- Bit Mask Definitions ----------------------------------------------------

// Bits in UADDR:

#define BM_USBEN 0x80 // USB Module Enable

// Bits in UIR0:

#define BM_EOPIE 0x80 // End-of-Packet Detect Interrupt Enable

#define BM_RXD2IE 0x10 // EP2 Rx Interrupt Enable

#define BM_TXD1IE 0x08 // EP1 Tx Interrupt Enable

#define BM_TXD0IE 0x02 // EP0 Tx Interrupt Enable

#define BM_RXD0IE 0x01 // EP0 Rx Interrupt Enable

// Bits in UIR1:

#define BM_EOPF 0x80 // End-of-Packet Detect Flag

#define BM_RSTF 0x40 // Clear Reset Indicator Bit

#define BM_RXD2F 0x10 // EP2 Data Receive Flag

#define BM_TXD1F 0x08 // EP1 Data Transmit complete Flag

#define BM_TXD0F 0x02 // EP0 Data Transmit complete Flag

#define BM_RXD0F 0x01 // EP0 Data Receive Flag

// Bits in UIR2:

#define BM_EOPFR 0x80 // End-of-Packet Flag Reset

//#define BM_RSTFR 0x40 // Clear Reset Indicator Bit

#define BM_RXD2FR 0x10 // EP2 Receive Flag Reset

#define BM_TXD1FR 0x08 // EP1 Transmit complete Flag Reset

#define BM_TXD0FR 0x02 // EP0 Transmit complete Flag Reset

#define BM_RXD0FR 0x01 // EP0 Receive Flag Reset

// Bits in UCR0:

Frees

cale Semiconductor,

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...