Specifications

6 - 12 DS457 Fixed Mount Imager Integration Guide
Motion Enhancement for Presentation Mode
Parameter # F1h A6h
Select Enable Motion Enhancement to fine-tune engine and imager behavior for bar codes moving quickly
through the imager’s field of view. Select
Disable Motion Enhancement to revert to standard Presentation
Mode behavior.
Motion Enhancement Performance Setting
Parameter # F1h 8Ah
This parameter is only valid when Enable Motion Enhancement is selected.
Standard Motion Performance is optimized for both motion insensitivity and depth of field. To further increase
the system’s motion tolerance, select
Extended Motion Performance. This option slightly reduces decode range.
NOTE Motion Enhancement parameters only apply when Trigger Mode on page 6-11 is set to Presentation
Mode.
NOTE Do not enable Motion Enhancement if scanning bar codes on mobile phones or electronic displays.
Enable Motion Enhancement
(01h)
*Disable Motion Enhancement
(00h)
*Standard Motion Performance
(02h)
Extended Motion Performance
(00h)