Specifications

7 - 14 DS457 Fixed Mount Imager Integration Guide
Presentation Snapshot by Motion
Parameter # F1h 87h
When the imager detects an object in its field of view, and the object stops moving, it attempts to capture a high
quality image and transmit it to the host. This applies to snapshot mode only. Select a bar code below to enable
or disable this feature.
Continuous Snapshot
Parameter # F1h 88h
Select Enable to stay in Snapshot Mode, and Disable to return to normal decode mode after image capture.
This only applies in Presentation Snapshot by Motion mode.
If you enable this, you can not scan parameter bar codes to exit this mode. To restore normal decode mode,
power cycle the imager, then scan the Disable Continuous Snapshot bar code.
*Disable Presentation Snapshot by Motion
(00h)
Enable Presentation Snapshot by Motion
(01h)
*Disable Continuous Snapshot
(00h)
Enable Continuous Snapshot
(01h)