Specifications

A - 2 Symbol DS9808 Product Reference Guide
Laser Preferred Timeout F1 7Dh 1.5 seconds 4-23
Dual Trigger Debounce Timeout F1 7Ah 0.05 seconds 4-23
Dual Trigger Processing F1 7Bh Wait 4-24
Host Trigger Mode F1 7Ch Imager Decoding 4-24
Picklist Mode F0h 92h Disabled Always 4-26
Continuous Bar Code Read F1 89h Disable 4-27
Decode Session Timeout 88h 9.9 Sec 4-27
Timeout Between Decodes, Same Symbol 89h 0.5 Sec 4-28
Timeout Between Decodes, Different Symbols 90h 0.2 Sec 4-28
Fuzzy 1D Processing F1h 02h Enable 4-29
Hand-Held Decode Aiming Pattern F0h 32h Enable 4-30
Hands-Free Decode Aiming Pattern F1h 4Eh Enable for PDF 4-31
Presentation Mode Field of View F1h 61h Full 4-32
Decoding Illumination F0h, 2Ah Enable 4-33
Miscellaneous Options
Transmit Code ID Character 2Dh None 4-34
Prefix Value 63h, 69h 7013 <CR><LF> 4-35
Suffix 1 Value
Suffix 2 Value
62h 68h
64h 6Ah
7013 <CR><LF> 4-35
Scan Data Transmission Format EBh Data as is 4-36
FN1 Substitution Values 67h 6Dh Set 4-37
Transmit “No Read” Message 5Eh Disable 4-38
Imaging Preferences
Operational Modes N/A N/A 5-4
Image Capture Illumination F0h 69h Enable 5-5
Gain / Exposure Priority for Snapshot Mode F1h 32h Autodetect 5-6
Snapshot Mode Timeout F0h 43h 0 (30 seconds) 5-7
Snapshot Aiming Pattern F0h 2Ch Enable 5-7
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.