Specifications

3 - 2 Symbol DS9808-R Product Reference Guide Supplement
Scanning Sequence Examples
In most cases scanning one bar code sets the parameter value. For example, to turn the beeper off, scan the Off
bar code under RFID Beeper Tone on page 3-11. The digital scanner issues a fast warble beep and the LED turns
green, signifying a successful parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
RFID Preferences Parameter Defaults
Table 3-1 lists the defaults for RFID preferences parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
Set Default parameter in the Symbol DS9808 Product Reference Guide.
Table 3-1 RFID Preferences Parameter Defaults
Parameter
Parameter
Number
Default
Page
Number
RFID Preferences
Multifunction Triggering Single Trigger 3-4
Trigger A F1h 77h Laser Preferred Decoding 3-4
Trigger B F1h 78h RFID Reading 3-6
Trigger A + B F1h 79h Ignore 3-7
Laser Preferred Timeout F1h 7Dh 1.5 seconds 3-8
Dual Trigger Debounce Timeout F1h 7Ah 0.05 seconds 3-8
Dual Trigger Processing F1h 7Bh Wait 3-9
Host Trigger Mode F1h 7Ch Imager Decoding 3-9
RFID Beeper Tone F1h 7Fh Medium to High Tone (2-Tone) 3-11
RFID Same Tag Timeout F1h 80h 5 Minutes 3-12
RFID Automatic Presentation Mode F1h 81h Hands-Free Only 3-14
RFID Trigger Mode F1h 82h Continuous 3-15
RFID Data Transmission Format F1h 83h Raw 3-16
RFID Transmit Raw with PC Bytes F1h CAh Disable 3-20
RFID Transmit Unknown Tag Data F1h C5h Transmit 3-20
RFID Antenna Selection F1h C6h Both 3-21