Specifications

Getting Started 1 - 3
Removing the Interface Cable
1. Press the cable’s modular connector clip through the access slot in the digital scanner’s base.
Figure 1-3 Removing the Cable
2. Carefully slide out the cable.
3. Follow the steps for Connecting the Interface Cable to connect a new cable.
Connecting to a USB Interface
1. Plug the USB interface cable series A connector in the USB host or hub, or plug the Plus Power connector into
an available port on the IBM SurePOS terminal.
2. If not using a PowerPlus cable, connect external power:
a. Plug the power supply adapter cable into the power jack on the interface cable.
b. Connect the other end of the power supply adapter cable to the power supply.
c. Plug the power supply into an AC outlet.
Figure 1-4 USB Connection
USB Connector
USB Interface Cable
Power Supply Adapter Cable
Power Supply