Specifications

1 - 2 Symbol DS9808-R Product Reference Guide Supplement
Unpacking
Remove the digital scanner from its packing and inspect it for damage. If the scanner was damaged in transit,
contact Motorola Enterprise Mobility Support. See page xi for contact information. KEEP THE PACKING. It is the
approved shipping container; use this to return the equipment for servicing.
Interfaces
The DS9808-R digital scanner supports the following interfaces. Refer to the Symbol DS9808 Product Reference
Guide for more information.
• USB
• Standard RS-232
• IBM 468X/469X
• Simple Serial Interface (SSI) (RFID configuration only)
Setting Up the Digital Scanner
Connecting the Interface Cable
1. Plug the interface cable modular connector into the cable interface port on the bottom of the digital scanner’s
base.
Figure 1-2 Installing the Interface Cable
2. Gently tug the cable to ensure the connector is secure.
NOTE Different interfaces require different cables. The connectors illustrated in the following sections are
examples only. Connectors vary from those illustrated, but the steps to connect the digital scanner are the
same.
Clip
To host
Interface cable port
Interface cable modular connector