Symbol CR0078-P Cradles Quick Reference Guide
Symbol CR0078-P Cradles © 2010 MOTOROLA, INC. All rights reserved. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Quick Reference Guide 3 Introduction The cordless scanner cradle model CR0078 (part CR0078-P) acts as a stand, charger and host communication interface for DS6878 cordless scanners. The CR0078-P cradle receives data from the scanner via a Bluetooth radio, and sends that data to the host through an attached cable. The cradle also charges the scanner’s internal battery pack when the scanner is inserted. The cradle must be powered by an external power supply.
Symbol CR0078-P Cradles Cradle Parts Front Latch Charging/ Communication Contacts Pager Button LED Back Power Cable Groove Rubber Foot Host Cable Groove Power Cable Groove Cable Support Hook Host Port Host Cable Groove Rubber Foot Cable Support Hook Power Port Mounting Hole Mounting Hole Rubber Foot Rubber Foot
Quick Reference Guide 5 Cradle Connections Important: Connect the interface cable and power supply in the following order to ensure proper operation of the scanner and cradle: 1. Insert the interface cable into the cradle’s host port. 2. Connect the other end of the interface cable to the host. 3. Connect the power supply to the cradle’s power port. 4. Connect the appropriate cable to the power supply and AC power source. 5.
Symbol CR0078-P Cradles Inserting the Scanner in the Cradle To insert the scanner in the cradle: 1. Insert the scanner by placing the bottom of the scanner, at a slight forward angle, into the CR0078-P cradle. 2. Push the handle back and down until it clicks, engaging the contacts of the scanner and cradle. 1 2 Click Removing the Scanner from the Cradle To remove the scanner from the cradle: 1. Remove the scanner by pushing the scanner slightly forward and up out of the CR0078-P cradle.
Quick Reference Guide 7 Sending Data to the Host Computer The cradle receives data from the scanner via a wireless radio connection and transmits it to the host computer via the host cable. The scanner and cradle must be paired for successful wireless communication. Pairing Pairing registers a scanner to the cradle so that the scanner and cradle can exchange information.
Symbol CR0078-P Cradles Charging the Scanner Battery in the Cradle To charge the scanner battery, place the scanner in the cradle (see Inserting the Scanner in the Cradle on page 6). The battery begins charging when the scanner LED indicator turns solid green. A complete charge of a fully discharged battery can take up to three hours. LED Charging Indications When powered up, the cradle LED is always green.
Quick Reference Guide Troubleshooting If the cradle does not work after following the previous procedures: • • • Check the system power. Check for loose cable connections. Check that the scanner is inserted properly in the cradle. • Check that the host settings are correct and the cradle is connected to the appropriate port on the host. CAUTION Do not pour, spray, or spill any liquid on the cradle.
Symbol CR0078-P Cradles Regulatory Information This device is approved under the Symbol Technologies brand; Symbol Technologies, Inc., is the Enterprise Mobility Solutions of Motorola, Inc. (“Motorola”). This guide applies to model number CR0078. All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following web site: http://www.motorola.
Quick Reference Guide 11 Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipment. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These request are designed to prevent possible interference with sensitive medical equipment.
Symbol CR0078-P Cradles Batteries Taiwan - Recycling EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. To charge the mobile device battery, the battery and charger temperatures must be between +32 °F and +104 °F (0 °C and +40 °C).
Quick Reference Guide • • • 13 Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400-2.4835 GHz. France, outside usage is restricted to 10mW EIRP. Italy requires a user license for outside usage. Statement of Compliance Motorola/Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC. A Declaration of Conformities may be obtained from the following web site: http://www.
Symbol CR0078-P Cradles Korean 鲮뼩 ꓩꟹ鱉 끩끞 닆 놹볁뿱겕 閵鱚ꫦ넩 넽넁 鲮뼩 ꓩꟹ 鱉놹볁뿱 겕 閵鱚ꫦ넩 넽냱ꕵꈑ 넭ꐺ껽놹隱 隵ꇝ鷑 ꟹ걙鱉 뼕 ꯍ 꽻걪鱽鲙 Taiwan Waste Electrical and Electronic Equipment (WEEE) Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Motorola за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.motorola.com/recycling/weee.
Quick Reference Guide 15 Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.motorola.com/recycling/weee. Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Motorola otrreizējai pārstrādei.
Service Information If you have a problem with your equipment, contact Motorola Enterprise Mobility support for your region. For contact information, go to: http://www.motorola.com/enterprisemobility/support. When contacting Enterprise Mobility support, please have the following information available: - Serial number of the unit - Model number or product name - Software type and version number Motorola responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements.
