Specifications

12 - 8 Symbol DS3407 Product Reference Guide
Special Commands
Pause Duration
This parameter, along with the Send Pause parameter on page 12-34, inserts a pause in the data transmission. Set
a pause by scanning a two-digit number (i.e., two bar codes) from Appendix D, Numeric Bar Codes representing a
0.1 second interval in the range of 0.1 to 9.9. For example, scan bar codes 0 and 1 to insert a 0.1 second pause; 0
and 5 to insert a 0.5 second delay. The default is 1 second. To correct an error or change a selection, scan
Cancel on page D-3.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule
.
Begin New Rule
Save Rule
Scan this bar code to save the rule.
Save Rule