Specifications

Chapter 7 RS-232 Interface
Introduction
This chapter provides instructions for programming the digital scanner to interface with an RS-232 host. Use the
RS-232 interface to attach the digital scanner cradle to point-of-sale devices, host computers, or other devices with
an available RS-232 port (i.e., COM port).
If your host does not appear in Table 7-2, set the communication parameters to match the host device. Refer to the
documentation for the host device.
Throughout the bar code menus, asterisks (
*) indicate default values.
NOTE This digital scanner uses TTL RS-232 signal levels, which interface with most system architectures. For
system architectures requiring RS-232C signal levels, Motorola offers different cables providing the TTL to
RS-232C conversion. Contact Motorola Enterprise Mobility Support for more information. See page xvii for
contact information.
*Baud Rate 9600
Feature/Option
* Indicates Default