Specifications

5 - 2 Symbol DS3478 Product Reference Guide
Scanning Sequence Examples
In most cases scanning one bar code sets the parameter value. For example, to disable the decode aiming pattern,
scan the Disable Decode Aiming Pattern bar code listed under Decode Aiming Pattern on page 5-4. The digital
scanner issues a fast warble beep and the LED turns green, signifying a successful parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Decoding Preferences Parameter Defaults
Table 5-1 lists defaults for digital scanner preference parameters. To change any option, scan the appropriate bar
code(s) provided in Decoding Preferences on page 5-3.
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 5-1 Decoding Preferences Default Table
Parameter Default
Page
Number
Decoding Options
Focus Mode Far Focus
Note: The default value for DS3478-DP
(DPM) digital scanners is Near Focus.
5-3
Decoding Illumination Enable 5-4
Decode Aiming Pattern Enable 5-4
DPM Scanning Enable 5-5