Specifications

1 - 20 Symbol CS3000 Series Scanner Product Reference Guide
Unpairing
To temporarily unpair the scanner and host, press the Bluetooth button. This disables Bluetooth and the Bluetooth
button stops blinking. Pressing the Bluetooth button again re-pairs the scanner with the host.
To permanently unpair the scanner and host, scan Unpair on page 3-13. This allows the scanner to pair to a
different host device.
Deleting the CS3070 from the Device List
To delete the device from the discovered devices list, tap and old the device and select Delete.
Figure 1-30 Deleting Device
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070
model only).