Specifications

Advanced Data Formatting 16 - 29
Setup Field(s)
Table 16-2 Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character Scan the
Move Cursor To Character on page 16-30 , then any
printable ASCII character from the
Alphanumeric Keyboard on page
16-90
. This moves the cursor to the position after the matching
character. If the character is not there, the rule fails and ADF tries the
next rule.
16-30
Move Cursor to Start of Data Scan this bar code to move the cursor to the beginning of the data. 16-30
Move Cursor Past a Character This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is ‘A’, then
the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
Move Cursor Past
Character on page 16-30
, then select a character from the
Alphanumeric Keyboard on page 16-90 . If the character is not there,
the cursor does not move (i.e., has no effect).
16-30
Move Cursor Past Specific String This action moves the cursor past the first occurrence of a selected
string.
16-30
Move Cursor to Specific String
and Replace
This action moves the cursor to the start of the first occurrence of a
selected string and replaces that string with another user-defined
string.
16-30
Move Cursor to Last Occurrence
of String and Replace All
This action replaces all occurrences of a specific string with a
user-defined string and moves the cursor to the beginning of the last
such occurrence.
16-30
Skip to End This action moves the cursor to the end of the bar code. 16-30
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions ahead
to move the cursor.
16-32
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back to
move the cursor.
16-33
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Table 8-4 on page 8-19 .
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
16-33