Specifications

Getting Started 1 - 15
Inserting/Removing Digital Scanner in the CR0078-P Cradle
To insert the scanner in the cradle:
1. Insert the scanner by placing the bottom of the scanner, at a slight forward angle, into the CR0078-P cradle.
2. Push the handle back and down until it clicks, engaging the contacts of the scanner and cradle.
Figure 1-12 Inserting the Digital Scanner in the Cradle
To remove the scanner from the cradle:
1. Remove the scanner by pushing the scanner slightly forward and up out of the CR0078-P cradle.
Figure 1-13 Removing the Digital Scanner in the Cradle
2
1
Click
2
1
Click