Service manual

6809511A67-O March 28, 2007 29

Level 1 and 2 Service Manual Disassembly

Removing and Replacing the Display Module Assembly

1. Remove the battery cover, battery, SIM, rear housing, transceiver board assembly, and

camera assembly as described in the procedures.

2. Using the disassembly tool, carefully disengage the side hooks of the display bracket.

3. Lift the display from the bracket.

4. Carefully and gently lift one corner of the display module assembly out of the housing

assembly.

5. To replace the main display lens, properly align the display lens on the bracket.

6. Align the display module to the housing assembly.

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when

handling.

Figure 26. Removing the Display Module

Figure 27. Display Module Removed

Disassembly tool