Service manual

6809511A67-O March 28, 2007 27
Level 1 and 2 Service Manual Disassembly
6. Remove Liner from doubled sided adhesive on keyboard. Attach keyboard to main board
as shown. Insure that the board to board connector is fully engaged.
7. Activate double side adhesive using Fixture# 2454 and air press set 6 psi and cycle time
to achieve 5 sec dwell of full contact.
8. Replace the rear housing, SIM, battery, and battery cover as described in the procedures.
061469o
Figure 22. Removing the Display Connector Pad
061469o
Figure 23. Removing the Display Connector Pad
Remove Tape
from Connector.