Service manual

6809511A67-O March 28, 2007 25

Level 1 and 2 Service Manual Disassembly

Removing and Replacing the Transceiver Board Assembly

1. Remove the battery cover, battery, SIM, and rear housing as described in the procedures.

2. Use the disassembly tool to pry loose the display flex connector from the main board.

3. Use the disassembly tool to separate main board from front housing.

This product contains static-sensitive devices. Use anti-static handling procedures

to prevent electrostatic discharge (ESD) and component damage.

061469o

Figure 18. Disconnecting the Flex from the Display Module

061469o

Figure 19. Separating the Main Board from the Front Housing