Service manual

20 March 28, 2007 6809511A67-O
Disassembly
7. Finish separating the housing as shown below.
8. Carefully rotate the rear housing away from the front housing assembly.
9. Lift the rear housing assembly away from the phone.
10. To replace the housing assembly take notice that he lower right screw does not fasten to a
screw insert, but rather a locking bracket, a small "L" shaped stamped metal part. This will
come loose once the screw is loosened. Postion the bracket before replacing the housing.
11. Carefully align the rear housing to the front assembly.
12. Gently press the housings together until they fit snuggly.
13. Replace the 4 housing screws and tighten to a final torque setting of 2.2 +/- 0.2 lbs. Do not
over tighten.
14. Replace the SIM, memory card, battery, and battery cover as described in the procedures.
061425o
Figure 9. Separating the Housing
061425o
Figure 10. Locking Bracket Positioning
Slide locking
bracket into this
location as shown.