Service manual

14 March 28, 2007 6809511A67-O
Tools and Test Equipment Q GSM
Tools and Test Equipment
The following table lists tools and test equipment recommended for disassembly and reassembly
of Q telephones. Use either the listed items or equivalents.
Table 1. General Test Equipment and Tools
Motorola Part Number
1
Description Application
0-00-00-40810 (U)SIM test card Used to enable manual test procedures.
RSX4043-A Torque Driver Used to remove and replace screws
— Torque Driver Bit T-6 Used with torque driver
See Table 7 Rapid Charger
Used to charge battery and to power
device
0180386A82
Antistatic Mat Kit (includes 66-80387A95
antistatic mat, 66-80334B36 ground
cord, and 42-80385A59 wrist band)
Provides protection from damage to
device caused by electrostatic discharge
(ESD)
0-00-00-30005 (AMS)
2
Disassembly tool, plastic with flat and
pointed ends (manual opening tool)
Used during assembly/disassembly of
device
19501980 (AMS)
2
Generic press tool Used to assemble the main lens.
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at [phone] or
FAX [phone]; Internationally, AAD can be reached by calling [phone] or faxing [phone].
2. Not available from Motorola. To order, contact: AMS Software & Elektronik GmbH, c/o Holger Grube, Lise-Meitner-
Straße9 D-24941 Flensburg Tel.: [phone] Fax: [phone].
Q GSM
6809511A67-O
1 and 2