user manual

Mesh Enabled Architecture Geo-Location Reference Guide
1
Overview
The Mesh Sensor Monitor (MSM) application provides an interface that allows a user/operator
to send or receive data from a remote wireless sensor node within a Mesh Enabled Architecture
(MEA™) network. Sensor devices can be connected to the MEA wireless device via an RS-232
or an RS-485 interface. Mesh Sensor Monitor is designed as a debug tool for sensor network
development, sensor/network integration, or third party development of sensor management
applications. A Mesh Sensor API is available for third party development of custom sensor
management applications.
Although MSM is used as the means for communicating directly with remote sensor devices, the
MeshManager™ suite of Element Management software applications must be used to configure
the serial interface on the MEA hardware (MWR6300/WSM6300). Configurable parameters
include baud rate, packetization parameters (time interval, sync character, number of
characters), GPIO configuration (input/output) and server IP address (the IP address of the host
executing the MSM application).
Supported Operating Systems
• Microsoft Windows 2000
• Microsoft Windows XP
System Requirements
• Motorola Device Manager version 9.x.x or higher
• Mobile Wireless Router (MWR6300) / Mesh Sensor Monitor (MSM6300)