user manual

Mesh Enabled Architecture Geo-Location Reference Guide

Node Data Summary Pane

The Node Data Summary Panel summarizes the number of data packets and bytes received

and sent from the specified sensor node.

Figure 11. Node Data Summary Pane

Current Incoming Activity Window

The Current Incoming Activity window is used to display serial modem activity that is currently

visible to the host device executing the MSM application. The node table is populated

automatically after active nodes have been selected from the Sensor ID window.

You can choose to either hide or show this window by selecting the Activity Window

option under the Window menu.

Figure 12. Current Incoming Activity Window

Current Incoming Activity Parameter Description

Event Time The date and time stamp for when the event that

triggered the alert was captured.

MAC Address The MAC address for the device being monitored.

IP Address The IP address the message came from. Under

normal conditions, this will be the same as the

Claimed IP address. If the message passes

through any device that does network address

translation (NAT), then this address reflects the

translated address.

Claimed IP The IP address for the transceiver of the

WSM6300.

Name The name of the network node being monitored.

The default display parameter is the MAC address