Specifications

16 17
The Basics
Battery
Covers
Removing the Auxiliary Battery Cover
1. Hold auxiliary battery securely with one hand. With your
other hand’s thumb, push up on bottom of the cover.
2. Continue to push up until the cover slides free of the pins
on the bottom of the battery, then swing the cover outwards.
2.
1.
Attaching the Auxiliary Battery Cover
1. Slide the cover’s narrow end into the small grooved hook
on the top of the auxiliary battery.
2. Push cover firmly so the base of cover slides past the pins
on the auxiliary battery, then release.
1.
Hook
2.
Pins
Battery Information
Your phone’s batteries are shipped in an uncharged state
with protective covers on them. Save these covers; use them
to carry batteries and to store batteries when they are not
in use. The cover prevents objects from touching the battery
terminals, thereby reducing the risk of injury or damage
from a short circuit (see page 8).
To begin using your phone, just slip a battery out of its
protective cover, install and charge the battery.
Removing the Main Battery Cover
1. Press in release latch.
2. Continue pushing in and upwards until battery slips free
from its cover.
2.
Release Latch
1.
Attaching the Main Battery Cover
1. Lower the side, opposite the release latch, into the cover.
2. Slip the side with the release latch down until it clicks.
1.
2.
Battery
Covers
Battery Information
StarTac.prt 3/7/00 9:45 Page 16