Modem User Manual

71 SBG1000 Wireless Cable Modem Gateway User Guide
Home
X
E
xitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Wireless > STATUS Page
Use this page to view the wireless interface status.
Wireless > STATUS Page Fields
Regulatory
Domain
Indicates the country the SBG is manufactured for. The list of channels depends on the country’s
standards for operation of IEEE 802.11b devices. Depending on the domain set at the factory, you
may see FCC USA, Europe, Spain, France, Japan, or some other country name in this field.
ESSID
(Network Name)
Displays the network name set on Wireless > Network page. For more information, see “Configuring a
Unique Wireless Network Name” on page 68.
Channel Displays the radio channel for the access point. If you encounter interference, you can set a different
channel on the Wireless > NETWORK Page (see page 72).
RTS Threshold Displays the RTS Threshold set on the Wireless > NETWORK Page.
Fragmentation
Threshold
Displays the Fragmentation Threshold set on the Wireless > NETWORK Page.
MAC Address Displays the SBG MAC address.
WEP Enabled Displays the type of Wired Equivalent Privacy (WEP) that is enabled. For more information, see
“Configuring Basic Wireless LAN Security” on page 69.
MAC Access
Control
Displays the state of MAC access control setting. It is set on the Wireless > SECURITY — advanced
Page (see page 74).
• Allow Listed — Only IEEE 802.11b stations in the MAC access control list can access the wireless
LAN.
• Allow Any Station Access — Any 802.11b station can access the wireless LAN.
MAC ACCESS
CONTROL LIST
Displays the MAC addresses of wireless clients having access. The list is set on the Wireless >
SECURITY — advanced Page.