user manual

3-42 Administrator’s Handbook
• WPA - 802.1x: If you select WPA - 802.1x you can then configure a RADIUS server to authenticate users of
the wireless network. To do this, you must return to the Security menu, Advanced Security Options to
specify the RADIUS server you want to use. See “Advanced Security Options” on page 10-5 and “VLAN
Configuration” on page 3-11.
• WPA Version: If you select either WPA-802.1x or WPA-PSK as your privacy setting, the WPA Version
pop-up menu allows you to select the WPA version(s) that will be required for client connections. Choices
are:
• All, for maximum interoperability,
Wireless LAN Configuration
Enable Wireless: Yes
SSID: 0271 1000
Block Wireless Bridging: No
Channel... 6
AutoChannel... Off
Closed System... Open
Enable Privacy... WPA - PSK (Pre-Shared Key)
Pre Shared Key:
Wireless Multiple SSID Setup...
MAC Address Authentication...
Select an 8 to 63 character passphrase. At least 20 is ideal for best security.
Wireless LAN Configuration
Enable Wireless: Yes
SSID: 0271 1000
Block Wireless Bridging: No
Channel... 6
AutoChannel... Off
Closed System... Open
Enable Privacy... WPA - 802.1x
Configure a RADIUS server in the Security menu, under
Advanced Security Options, to authenticate using 802.1x.
If the SSID is part of a VLAN, it will use the VLAN's
configured RADIUS server in the Authentication Profile instead.
Wireless Multiple SSID Setup...
MAC Address Authentication...