user manual

3-28 Administrator’s Handbook
2. Enter a VLAN ID (1 – 4094) and enter the VLAN Name you would like.
For example, call it Network A. This VLAN will be for SSID 2, which is a "closed system" SSID, and the
Ethernet por ts.
3. For the VLAN Network select the Primary LAN from the pop-up menu.
4. Select ADD VLAN and press Return.
This creates the VLAN and returns you to the VLAN Configuration screen.
5. In the VLAN Configuration screen select Display/Change VLAN, and from the pop-up menu select
Network A (which you have just created).
Add VLAN...
VLAN ID (1-4094): 1
VLAN Type... port-based
VLAN Name: Network A
VLAN Network: <None>
Inter-VLAN-Routing...
802.1x: No
Once a VLAN has been successfully added, configure ports using the
"Add Port Interface" option of the "Display/Change VLAN" menu.
ADD VLAN CANCEL
Return/Enter to select <among/between> ...
Configure a new VLAN and its associated ports.
Add VLAN...
+-Name---------------------------IP Address------+
+------------------------------------------------+
| Primary LAN 192.168.1.1 |
| Additional LAN 1 192.168.2.1 |
| Additional LAN 2 1.1.1.1 |
| Easy Setup Profile 127.0.0.2 |
| <None> |
| |
+------------------------------------------------+
Once a VLAN has been successfully added, configure ports using the
"Add Port Interface" option of the "Display/Change VLAN" menu.
ADD VLAN CANCEL