user manual

3-20 Administrator’s Handbook

Adding Port interfaces

Note: You must ﬁrst ADD the VLAN before associating the Inter-VLAN-Routing Groups or the Port Interfaces.

Once you have added the VLAN, you access the Inter-VLAN-Routing screen and the Add Port Inter face screen by

selecting Display/Change VLAN from the VLAN Conﬁguration screen.

Once you have created a VLAN entry you must associate it with a por t interface. This interface may be either a

physical port, such as USB or Ethernet, or a Network ID (SSID) of a wireless LAN. If you have a Motorola

Netopia

Router model that offers Motorola’s VGx technology, you can also associate a VLAN with each of the

physical Ethernet managed switch por ts.

When setting up a VLAN, typically you will add one or more physical ports, such as an Ethernet port or a

wireless SSID.

Note: You can associate two VLANs, one of which is 802.1x authenticated and the other is not, with the

same port. This allows you to have authenticated access for PCs on the wired-or wireless LAN to

non-authenticated devices such as print servers.

Return to the VLAN Conﬁguration screen, select Display/Change VLAN, and from the pop-up menu, select the

VLAN ID to be modiﬁed.

The Display/Change VLAN screen appears.

VLAN Configuration

VLAN Enable: +----------VLAN ID: NAME----------+

+---------------------------------+

Display/Change VLAN... | 10: Network A |

Add VLAN... | |

Delete VLAN... | |

| |

Authentication Server| |

| |

+---------------------------------+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.