user manual

3-16 Administrator’s Handbook
• VLAN Network – From the VLAN Network pop-up menu select None, Primary LAN, a Connection Profile (for
the IP networking configuration) or, if you have configured an Additional LAN (ALAN), an Additional LAN. See
“Additional LANs” on page 7-38.
• 802.1x – This option is only available for Router models with VGx technology. Otherwise, it does not
appear. If you are configuring a VLAN for a Motorola Netopia
®
Router model with VGx technology (wired or
wireless), you can specify a RADIUS server for user authentication by toggling 802.1x to Ye s. See “Adding
a RADIUS Profile” on page 3-18. The default is No.
Add VLAN...
+-Name---------------------------IP Address------+
+------------------------------------------------+
| Primary LAN 192.168.1.1 |
| Additional LAN 1 0.0.0.0 |
| Additional LAN 2 1.1.1.1 |
| Easy Setup Profile 127.0.0.2 |
| <None> |
| |
+------------------------------------------------+
Once a VLAN has been successfully added, configure ports using the
"Add Port Interface" option of the "Display/Change VLAN" menu.
ADD VLAN CANCEL