user manual

Security 10-47
A warning screen will ask you to confirm your choice.
Factory Default to a saved configuration
If you need to Factory Default the Router, it may be useful to be able to return to a previously saved
configuration, rather than to completely reconfigure all your settings. To do this, you designate one of your
saved configurations as the Factory Default configuration.
From the Factory Default from Configuration pop-up menu, select the configuration you want to designate as
the Factory Default.
Configuration Management
+-Configuration Name---Type---+
Save Current Configuration as... +-----------------------------+
Replace Existing Configuration... | HappyInternet Binary |
Boot from a Configuration... | Config1 Binary |
Delete a Configuration... | LesMizz Binary |
+-----------------------------+
Factory Default from Configuration: <none>
Remove Factory Default Configuration
Configuration Management
+-----------------------------------+
Save Current Conf+-----------------------------------+
Replace Existing | LesMizz Binary |
Boot from a Confi| HappyInternet Binary |
Delete a Configur| Config1 Binary |
| |
| |
| |
| |
Factory Default f| |
Remove Factory De+-----------------------------------+
Up/Down Arrows to select, then Return/Enter; ESC to cancel.