user manual

2-12 Administrator’s Handbook
6. Toggle or enter your IP Parameters.
For more information, see:
• “IP Setup” on page 7-1
• “Network Address Translation (NAT)” on page 3-2
• “Stateful Inspection Options” on page 3-8
• “Filter Sets” on page 3-2
• The RIP Profile Options selection displays the RIP Profile Parameters screen.
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Numbered
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
NAT Options...
Stateful Inspection Enabled: No
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Filter Set...
Remove Filter Set
RIP Profile Options...
Return/Enter to select <among/between> ...
Configure IP requirements for a remote network connection here.