user manual

10-4 Administrator’s Handbook
• Assign a User Name and Password, and enable or disable Telnet and Web access as in the Superuser
Configuration screen.
• Select Access Privileges, and from the pop-up menu, choose which access privilege you want this user to
have: All, LAN, or WAN.
If you assign any of these privileges, limited users will have full access to privileges associated with these
interfaces. You can customize these privileges further, in order to limit access to only certain portions of
those interfaces’ configuration, by selecting Custom. If you select Custom, the Access Privileges
(Custom) screen appears.
Add Access Name/Password
Name (19 characters max): user
Password: ********************
Telnet Access Enabled: Yes
+-----------+
+-----------+
Access Privileges... | All |
| LAN |
| WAN |
| Custom... |
+-----------+
ADD USER CANCEL
Access Privileges (Custom)
WAN Data Configuration: No
Connection Profile Configuration: No
Circuit (PVC/DLCI) Configuration: No
LAN Data Configuration: Yes
LAN Subnet Configuration: Yes
NAT/Filters Configuration: Yes
Preferences (Global) Configuration:Yes
OK CANCEL