user manual

7-40 Administrator’s Handbook
• Ethernet IP Address – The IP address of the additional LAN.
• Ethernet Subnet Mask – The IP subnet mask address of the additional LAN.
• Define Additional Subnets – Additional subnets for multi-homing (same as the primary interface). See “IP
Address Pools” on page 7-19.
• IP Address Serving – Same as the global link to address ser ving. See “IP Address Serving” on page 7-17.
• RIP Options – Same as the primary interface. See “RIP Options” on page 7-9.
• VRRP Options – Same as the primary interface. Two Virtual routers can be added to each of the ALANs.
See “Virtual Router Redundancy (VRRP)” on page 7-34.
• Multicast Forwarding – Same as the primary inter face. See “Multicast Forwarding” on page 7-32.
• Filter Set – Attaches a defined filter set to the LAN. See “About Filters and Filter Sets” on page 10-20.
When you are finished, select COMMIT and press Return. Your ALAN is configured.
Note: ALAN creation or deletion takes effect only upon reboot. See “Restarting the System” on page 11-8, if
you don’t know how to do this.
Editing or Deleting ALANs
You can manage or edit your ALANs at any time. To modify or delete a configured ALAN, return to the IP Setup
screen and select Additional LANs.
The Additional LAN Configuration screen appears.
If you select either Show/Change ALAN or Delete ALAN, a pop-up window allows you to choose the ALAN you
want to modify or delete.
Additional LAN Configuration
Show/Change ALAN...
Add ALAN...
Delete ALAN...