user manual

IP Setup 7-33
• Then you associate it with a Connection Profile in the IP Profile Parameters screen in the
Add/Display/Change Connection Profile menus.
Navigate to the IP Setup screen.
By default, Multicast Forwarding is tuned off (None). You enable the gateway to transmit multicast data by
selecting Tx. from the pop-up menu.
You can fine-tune IGMP options in the IGMP Setup menu. See “IGMP (Internet Group Management Protocol)”
on page 3-52.
Navigate to the IP Profile Parameters screen.
IP
System Configuration
Main
Menu Setup
IP Setup
Ethernet IP Address: 192.168.1.1
Ethernet Subnet Mask: 255.255.255.0
Define Additional Subnets...
Default IP Gateway: 0.0.0.0
Backup IP Gateway: 0.0.0.0
Primary Domain Name Server: 0.0.0.0
Secondary Domain Name Server: 0.0.0.0
Domain Name:
Rip Options...
Proxy Arp Enabled: +----------------+
Multicast Forwarding... +----------------+
| None |
| Tx. |
VRRP Options... +----------------+
Static Routes... IP Address Serving...
Add/Display/Change
WAN Configuration
Main
Menu Connection Profile