user manual

6-12 Administrator’s Handbook
A Change Connection Profile screen is shown below.
Example #1: Change Connection Profile menu, showing Encapsulation Type pop-up:
Note: The Change Connection Profile screen will offer different options, depending on the model of gateway
you are using. You can associate an IPsec profile with the Primary, the Backup, or choose to apply it to Any Port
of the WAN interface by choosing the inter face from the Interface Group pop-up menu as shown below.
Example #2: Add Connection Profile menu, showing Interface Group pop-up:
Change Connection Profile
Profile Name: Easy Setup Profile
Profile Enabled: +-------------+
+-------------+
Encapsulation Type... | PPP |
Encapsulation Options... | ATMP |
| PPTP |
| IPsec |
IP Profile Parameters... +-------------+
Telco Options...
COMMIT CANCEL
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Encapsulation Type... IPsec
Encapsulation Options...
IP Profile Parameters...
+--------------+
+--------------+
Interface Group... | Primary |
| Backup |
| Any Port |
+--------------+
COMMIT CANCEL