Manualshelf

user manual

ManualsBrandsMotorola ManualsrouterRouter Enterprise Series Routers
151152153154155156157158159160
Virtual Private Networks (VPNs) 5-13
Easy Setup
System Configuration
Menu
GRE Profile
Encapsulation
Menu
GRE Profile IP
Parameters Menu
Static WAN IP
IP =
some_IP_address
Mask =
some_IP_mask
Data Link
Encapsulation =
1483, 1490,
HDLC, PPP
IP Default Gateway =
127.0.0.2
Gateway Static Route:
Destination Network =
GRE
Remote_Tunnel_End_Point
Destination Netmask =
Remote_Tunnel_End_Point
_
netmask
Next Gateway =
local_WAN_IP
Remote Tunnel
End Point =
peer_tunnel_
IP_address
Remote Member
IP = 127.0.0.2
Remote Member
Mask cannot be
255.255.255.255
Dynamic WAN
IP
IP = 0.0.0.0
Mask = 0.0.0.0
IP Default Gateway =
127.0.0.2
Gateway static route is
recommended
see above see above
Static PPPoE
Remote IP =
some_IP_address
Remote Mask =
some_IP_mask
see above see above see above
Auto PPPoE
Remote IP =
127.0.0.2
Remote Mask =
255.255.255.255
IP Default Gateway =
127.0.0.3
see above Remote Member
IP = 127.0.0.3
Remote Member
Mask cannot be
255.255.255.255
Note: A GRE tunnel cannot transmit RIP routes over a force-all tunnel, or with a remote member IP with a
host part of all zeros.