user manual

Multi-NAT 4-33
Select ADD NAT PUBLIC RANGE and press Return. You are returned to the Network Address Translation
screen.
Next, select Show/Change Map List and choose Easy-PAT List. Select Add Map. The Add NAT Map screen
appears. (Now the name Easy-PAT List is a misnomer since it has a static map included in its list.) Enter in
192.168.1.1 for the First Private Address and 192.168.1.5 for the Last Private Address.
Select Use NAT Public Range and from the pop-up menu choose Static Range. Select ADD NAT MAP and
press Return.
This will statically map the first five public IP addresses to the first five corresponding private IP addresses and
will map 206.1.1.6 to the remaining private IP addresses using PAT.
Add NAT Public Range
Range Name: Static Range
Type... static
First Public Address: 206.1.1.1
Last Public Address: 206.1.1.5
ADD NAT PUBLIC RANGE CANCEL
Return/Enter to commit changes.
Add NAT Map ("Easy-PAT List")
First Private Address: 192.168.1.1
Last Private Address: 192.168.1.5
Use NAT Public Range...
ADD NAT MAP CANCEL