user manual

4-22 Administrator’s Handbook
• Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.
• Select the map list you want to bind to this Connection Profile and press Return. The map list you selected
will now be bound to this Connection Profile.
• Select NAT Server List and press Return. A pop-up menu displays a list of your defined server lists.
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Numbered
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
NAT Options...
Stateful Inspection Enabled: No
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Remote IP Address: 127.0.0.2
Remote IP Mask: 255.255.255.255
Filter Set...
Remove Filter Set
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
IP Profile Parameters
+--NAT Map List Name---+
Address Trans+----------------------+s
IP Addressing| Easy-PAT List |mbered
NAT Map List.| my_map |sy-PAT List
NAT Server Li| <<None>> |sy-Servers
NAT Options..| |
Stateful Insp| |
| |
Local WAN IP | |0.0.0
Local WAN IP | |0.0.0
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
Filter Set...| |
Remove Filter| |
| |
| |
| |
| |
RIP Profile O+----------------------+
Up/Down Arrows to select, then Return/Enter; ESC to cancel.