user manual

4-18 Administrator’s Handbook
• Enter the Internal Port Start, if different from and not already preselected from the External Service type
list.
• Select ADD NAT SERVER and press Return. The ser ver will be added to your server list and you will be
returned to the Add NAT Ser ver List screen.
Note: In order to use CUSeeMe through the Motorola Netopia
®
Router, you must export the ports 7648 and
7649. In MultiNat, you may use a port range export. Without the export, CUSeeMe will fail to work. This is true
unless a static mapping is in place for the host using CUSeeMe. In that case no server list entry is necessary.
Modifying server lists
Once a server list exists, you can select it for modification or deletion.
• Select Show/Change Server List from the Network Address Translation screen.
• Select the Server List Name you want to modify from the pop-up menu and press Return.
Add NAT Server ("my_servers")
External Service...
Server Private IP Address: 192.168.1.45
Public IP Address: +-------------+
+-------------+
Protocol... | TCP and UDP |
| TCP |
Internal Port Start: | UDP |
+-------------+
ADD NAT SERVER CANCEL