User manual

Overview
14-50
Example
RFS7000(config-wireless)#wlan 25 accounting syslog
RFS7000(config-wireless)#
RFS7000(config-wireless)#wlan 25 answer-bcast-ess
RFS7000(config-wireless)#
RFS7000(config-wireless)#wlan 25 authentication-type kerberos
RFS7000(config-wireless)#
RFS7000(config-wireless)#wlan 25 description "TestWLAN"
RFS7000(config-wireless)#
secure-beacon
Do not include the SSID of this WLAN in Beacon frames.
ssid
The SSID of this WLAN.
symbol-extensions fast-
roaming (enable)
Enables support for Symbol extensions.
• fast-roaming (enable) – Enables support for Symbol fast roaming.
syslog (accounting)
server <IP Address>
port <Port number>
Syslog Accounting.
• accounting – Modifies accounting parameters.
• server <IP Address> – Modifies syslog accounting server IP address.
• port <Port Number> – Syslog server port. The default port is 514.
tunnel <1-32> (gateway) <IP
Address and Mask>
The tunnel index mapping for this WLAN.
• <1-32> – A tunnel index.
• gateway – The gateway IP address and mask.
• A.B.C.D/M – IP address and mask.
vlan<1-4094>
The VLAN assignment of this WLAN.
wep128 (key<1-4>
(ascii|hex)<0|2|WORD> |
phrase (LINE) | wep-default-
key<1-4>)
Configures WEP128 parameters.
•key<1-4> – Configures pre-shared hex keys.
• ascii – Keys as ascii characters (5 characters for wep64, 13 for wep128).
• hex – Keys as hexadecimal characters (10 characters for wep64, 26 for
wep128).
• 0 – Password is specified UNENCRYPTED.
• 2 – Password is encrypted with password-encryption secret.
• WORD – Key (10 hex or 5 ascii characters for wep64, 26 hex or 13 ascii
characters for wep128).
• phrase – Specifies a passphrase from which the keys are derived.
• LINE – The passphrase (between 4 and 32 characters).
• wep-defauly-key<1-4> – The key index used for transmission from the
access port to MU.
wep64
Configure WEP64 parameters.