User manual

14-47

qos

[classification | mcast1 |

mcast2 | prioritize-voice |

svp | wmm]

Quality of Service commands.

• classification [background|best-effort|video|voice|wmm] – Select how

traffic on this WLAN is classified (relative prioritization on the access

port).

• background – Traffic on this WLAN is treated as background traffic.

• best-effort – Traffic on this WLAN is treated as best-effort.

• video – Traffic on this WLAN is treated as video.

• voice – Traffic on this WLAN is treated as voice.

• wmm – Use WMM based classification (using DSCP or 802.1p tags)

to classify traffic into different queues.

• mcast1|mcast2 (AA-BB-CC-DD-EE-FF) – The Egress prioritization multicast

mask.

• AA-BB-CC-DD-EE-FF – MAC address in AA-BB-CC-DD-EE-FF format.

• prioritize-voice – Prioritizes voice frames over general data frames (applies

non-WMM mobile unit).

• svp (enable) – Enables Spectralink Voice Prioritization support on this

WLAN.

limit|acm) – 802.11e / Wireless MultiMedia (WMM) parameters

(supported only on AP300).

• 8021p – Uses 802.1p frame priority (field in the VLAN tag) to

determine packet priority.

• background – Background category traffic.

• best-effort – Best effort category traffic.

• dscp – Uses DSCP (Differentiated Services Code Point) bits in the IP

header to determine packet priority.

• video – Video traffic category traffic.

• voice – Voice traffic category traffic.