User manual

14-43
dot11i [handshake | key |
key-rotation | key-rotation-
interval |
opp-pmk-caching |
phrase|pmk-caching |
preauthentication | second-
key|
tkip-cntrmeas-hold-time]
Modifies tkip/ccmp (802.11i) related parameters.
handshake (timeout <100-5000>) (retransmit<1-10>)Use a handshake
to configure timeout and retransmission.
timeout<100-5000> – The timeout (in milliseconds) between
retries.
retransmit<1-10> – The number of retransmission attempts.
key(0|2|WORD)Configure the key (PMK).
0 – Password is specified UNENCRYPTED.
2 – Password is encrypted with password-encryption secret.
WORD – The 256bit (64 hex characters) long key.
key-rotation (enable)Controls the periodic update of the broadcast
keys for all associated mobile units.
key-rotation-interval <1800-86400> – Configures the broadcast key
rotation interval.
opp-pmk-cachingEnables the opportunistic use of cached pairwise
master keys (fast roaming with eap/802.1X).
phrase(0|2|LINE) – Configures the passphrase.
0 – Password is specified UNENCRYPTED.
2 – Password is encrypted with password-encryption secret.
LINE – A passphrase between 8 and 63 characters long.
pmk-caching – Enables the use of cached pairwise master keys (fast
roaming with eap/802.1X).
preauthentication – Enables support for 802.11i pre-authentication.
second-key(enable|key|phrase) (0|2|WORD) – Configures a secondary set
of key/passphrase for this WLAN.
enable – Enables the use of a secondary key/passphrase.
key – Configures the key (PMK).
phrase – Configures the passphrase.
0 – Password is specified UNENCRYPTED.
2 – Password is encrypted with password-encryption secret.
WORD – The 256bit (64 hex characters) long key.
tkip-cntrmeas-hold-time <0-65535> – Configures the hold-time (in
seconds) that clients are blocked when tkip countermeasures are invoked.
Default is 60 seconds.
wpa2-tkip (enable) – Enables support for WPA2-TKIP (in addition to
WPA-TKIP) when TKIP is enabled on this WLAN.
enable()
Enables specified wireless LAN(s).