User manual

Overview
2-18
Parameters(Global Config)
Example
RFS7000#service diag ?
enable Enable in service diagnostics
led LED control
limit diagnostic limit command
period Set diagnostics period
RFS7000#service diag enable
RFS7000#service diag limit ?
buffer buffer usage warning limit
fan Fan speed limit
filesys file system freespace limit
load agregate processor load
maxFDs maximum number of file descriptors
pkbuffers packet buffer head cache
procRAM percent RAM used by a process
ram percent free RAM
routecache IP route cache usage
temperature temperature limit
advanced-vty
Enables advanced mode vty interface.
dhcp
Enables the DHCP server service.
password-encryption
(secret)2 LINE
Encrypts passwords.
• secret (2) – Encrypts passwords with secret phrase, using SHA256-
AES256 encryption.
• LINE – Enter a passphrase for encryption.
pm
(max-sys-restarts <1-5> |
sys-restart)
Process Monitor.
• max-sys-restarts <1-5> – Maximum number a process monitor must
restart the system due to a failed processes.
• sys-restart – Enables the process monitor to restart the system when a
process fails.
prompt (crash-info)
Enables crash-info prompt.
radius (restart)
Enables the RADIUS Server.
set (command-history
<10-300>|reboot-history
<10-100>|
upgrade-history <10-100>)
Set service parameters.
• command-history <10-300> – Sets the size of the command history. The
default value is 200.
• reboot-history <10-100> – Sets the size of the reboot history. The default
value is 50.
• upgrade-history <10-100> – Sets the size of the upgrade history. The
default value is 50.
show (cli)
Displays running system information.
• cli – Shows the CLI tree of current mode.
terminal-length <0-512>
System wide terminal length configuration.
• <0-512> – Number of lines of VTY (0 means no line control).