User manual

Overview
14-28
bss (<1-4>|auto) WLAN
Map wireless LANs to radio BSSID’s.
<1-4> –The BSS where a wireless lLAN is mapped.
auto – Automatic assignment of BSS. If the user selects wireless lans d
the system assigns them to a BSS automatically.
WLAN – A list (1,3,7) or range (3-7) of WLAN indices. When a BSS is
specified, the first WLAN is used as the primary WLAN. When the auto
option is used, the system automatically assigns the first four WLANs
as primaries on their respective BSS’s.
cca-level<1-31>
CCA level value.
cca-mode<0-3>
CCA mode value.
channel-power
(indoor|outdoor)
(<1-2000>|acs|random)
<4-20>
Location, channel and transmit power level.
indoor – Indoor location.
outdoor – Outdoor location.
<1-2000> – Channel number.
acs – Auto channel selection (radio scans for the least congested
channel at startup or reconfiguration).
random – Random channel selection.
<4-20> – Power in dBm.
coordinates
(X,Y,Z coordinates)
Configures the location of this radio using x.y.z coordinates.
<-65535-65535> – X Coordinate.
<-65535-65535> – Y Coordinate.
<-65535-65535> – Z Coordinate.
copy-config-from
(<1- 4096>|default-11a|
default-11b|default-11bg)
Copies the configuration from a previously configured radio.
<1- 4096> – A single radio index.
default-11a – default 11a configuration template.
default-11b – default 11b configuration template.
default-11bg – default 11bg configuration template.
description
Configures a description for this radio. Must not exceed 20 characters.
detector
Dedicates this radio as a detector. No mobile units can associate to a detector.
dtim-period<1-50>
bss <1-4>
DTIM period (number of beacons between successive DTIMs)
<1-50> – DTIM period.
bss – BSS.
<1-4> – BSS index.
enforce-spec-mgmt
(enable)
Enforces spectrum management checks on specified radios. Only mobile units
that advertise spectrum management are allowed to associate to this radio.
location-message
Specifies a message sent to mobile units that associate with these radios. This
message must not exceed 80 characters.