User manual

Overview
2-14
filesys (etc2|flash|var)
Use this parameter to set the file system freespace limit. Select the freespace
limit for the following sub context:
•etc2
•flash
•ram
inodes (etc2|flash|var) File system inode limit. Select the freespace limit for the following sub context:
•etc2
•flash
•ram
load (1|15|5) Configures the aggregate processor load. Select from the following submodes:
• 1 – Aggregate processor load during the previous minute.
• 15 – Aggregate processor load during the previous 15 minute.
• 5 – Aggregate processor load during the previous 5 minute.
maxFDs <0-32767> Configures the maximum number of file descriptors. Set anything between 0 to
32767 file descriptors.
pkbuffers <0-65535> Configures and set the packet buffer head cache limit. Set anything between 0
to 65535 as the buffer cache limit.
procRAM < 0.0-100.0> Defines the RAM space used by a process. Set the percentage of RAM space to
be used by the processor from anything between 0.0 to 100.0 percent.
ram <0.0-25.0> Configures the free space for the RAM. Configure the free space to anything
between 0.0 to 100.0 percent.
routecache <0-65535> Defines the IP route cache usage. Set with a value between 0 - 65553.
temperature <1-8> Sets the switch temperature sensor. Set as many as 8 temperature sensors.
period <100-30000> Sets the diagnostic period.
• <100-30000> – Configures the diagnostics period. Set a value between
100-30000 milli seconds. The default value is 1000 milliseconds.
watchdog Enables the watchdog.
encrypt(secret) 2 LINE Encrypts passwords with a secret phrase using SHA256-AES256 encryption.
save-cli Create’s a file (clitree.html), which saves and displays the CLI tree for all modes.