User manual

Overview
13-26
13.1.14 server
RADIUS Configuration Commands
Use this command to configure server certificate parameters used by RADIUS server. The server certiificate is
a part of trustpoint created crypto on page 5-17.
Syntax
server trust-point
Parameters
Usage Guidelines
Create a trustpoint using (crypto-pki-trustpoint). Server certificate must be created under the trustpoint
using the crypto-pki commands. Refer to crypto on page 5-17 for more details.
Example
RFS7000(config-radsrv)#server trust-point TestTP
RFS7000(config-radsrv)#
trust-point (WORD) Trust point configuration.
• WORD – Existing trust point name.