User manual

13-15
+-mo [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-sa [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-su [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-th [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-tu [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-we [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-weekdays [policy day (all|weekdays|{mo|tu|we|th|fr|sa|su})]
+-time
+-start
+-<0-23>
+-<0-59>
+-end
+-<0-23>
+-<0-59> [policy time start <0-23> <0-59> end <0-23> <0-59>]
-- MORE --, next page: Space, next line: Enter, quit: Control-C
RFS7000(config-radsrv-group)#
13.1.7.11 show
RADIUS Configuration Commands
Use this command to view the current system information.
Syntax
show<paramater>
Parameters
Example
RFS7000(config-radsrv-group)#show ?
access-list Internet Protocol (IP)
alarm-log Display all alarms currently in the system
autoinstall autoinstall configuration
banner Display Message of the Day Login banner
boot Display boot configuration.
clock Display system clock
commands Show command lists
crypto crypto
debugging Display debugging setting
environment show environmental information
file Display filesystem information
ftp Display FTP Server configuration
history Display the session command history
interfaces Interface status and configuration
ip Internet Protocol (IP)
ldap ldap server
licenses Show any installed licenses
logging Show logging configuration and buffer
mac Media Access Control
management Display L3 Managment Interface name
mobility Display Mobility Parameters
ntp Network time protocol
password-encryption password encryption
privilege Show current privilege level
radius Radius configuration commands
redundancy-group Display redundancy group parameters
redundancy-history Display state transition history of the switch.
redundancy-members Display redundancy group members in detail
running-config Current Operating configuration
securitymgr Display debug info for ACL, VPN and NAT
? Displays the parameters for which information can be viewed using the show
command. For additional information, refer to radius and show.