User manual

Overview
13-12
Parameters
Example
RFS7000(config-radsrv-group)#no policy day
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no policy time
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no policy vlan
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no policy wlan 2 5
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no rad-user all
RFS7000(config-radsrv-group)#
RFS7000(config-radsrv-group)#no service radius
%%Info: Radius service stopped...
RFS7000(config-radsrv-group)#
13.1.7.8 policy
RADIUS Configuration Commands
Use this command to configure the authorization policies for a particular group, like day/time of access,
wireless LAN allowed to access and to set user based VLAN .
policy RADIUS group access policy configuration.
day Resets access policy day for this group.
time Configures access policy time for this group.
vlan VLAN ID for this group.
wlan Configures WLAN access policy for this group.
<1-32> WLAN Range.
all Removes allowed WLANs.
rad-user Removes users from this group.
WORD Existing user name in this group.
all Removes all users from this group.
service Service commands.
radius Disables the RADIUS Server.
NOTE User based VLAN is effective only if dynamic VLAN authorization is enabled on
the wireless LAN page.