User manual

RADIUS Server Instance
The radius-server local command takes you to the RADIUS server mode. Local (Onboard) RADIUS server
configuration commands are listed under this mode. Use the
(config-radsrv)instance to configure local
RADIUS server parameters.
13.1 RADIUS Configuration Commands
Table 13.1 summarizes the Gloabl Config commands.
Table 13.1 Extended ACL Config Command Summary
Command Description Ref.
authentication RADIUS authentication. page 13-3
ca Configures ca certificate parameters. page 13-4
clrscr Clears the display screen. page 13-5
crl-check Certificate Revocation List (CRL) check. page 13-6
end Ends the current mode and moves to the EXEC mode. page 13-7
exit Ends the current mode and moves to the previous mode. page 13-8
group Configures RADIUS user group paramaters.
NOTE Creates another sub-instance called
config-radsrv-group
with its own command summary.
page 13-9
help Describes the interactive help system. page 13-19