User manual

Overview
12-22
12.1.20 no
DHCP Config Commands
Use this command to negate a command or set defaults.
Syntax
no [address|bootfile|client-identifier|client-name|ddns|default-router|dns-
server|domain-name|hardware-address|host|lease|netbios-name-server|netbios-node-
type|network|next-server|option|update]
Parameters
The no command negates any command associated with it. Wherever required, use the same parameters
associated with the command getting negated.
Example
RFS7000(config)#no ip dhcp pool hotpool
RFS7000(config)#
RFS7000(config)#no ip dhcp pool test
RFS7000(config)#
RFS7000(config-dhcp)#no update dns
RFS7000(config-dhcp)#